Nesneler

Projector Screen 3D Models: Mounts, Stands, Brackets

This collection gathers 3D-printable parts that hold, hang or frame a projection surface: wall and ceiling mounts, floor stands, brackets and trim pieces. It is useful when a ready-made mount does not match your room or your screen size, and you would rather print the part yourself. Most files are meant for a 3D printer working in common filaments, though the exact material and settings come from the author. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2475 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2475 model
Kategori hakkında

«Projector Screen 3D Models: Mounts, Stands, Brackets»

The models fall into a few groups. Mounts and brackets attach a screen to a wall or ceiling and often include a plate plus an arm or a jaw. Stands and shelves are floor or desk pieces that carry a small projector or a compact screen. Trim and cover parts deal with the visible edges, and green screen supports hold a fabric backdrop instead of a rigid surface.

When choosing, open the model page and read what the author states: the size and scale of the printed part, how many pieces it has and how they join, whether supports are needed, and which material and settings were used. Look at photos of real prints to judge wall thickness and how the joints are reinforced. Then compare those numbers with the weight and dimensions of your own screen, since a printed holder carries load through its screws and arms.

If the first search is thin, try related wording: ceiling bracket, wall plate, pull-down hanger, desk stand, shelf, clamp, corner trim, backdrop frame. Combining a mounting word with a room word, such as ceiling or desk, usually narrows results faster than a single broad term. You can also search by the object being held, for example canvas or fabric, to find holders built for thin material.

FAQ

Sıkça sorulan sorular

What do I need to know before printing a projector screen mount?
Check the stated part size, the number of pieces, and how they are fastened together. The author's page usually lists the material and settings used for the shown print.
Can a printed part hold a large screen?
It depends on the printed geometry, the wall thickness and how the load is spread across screws or anchors. Compare the model's dimensions and mounting points with your screen before printing.
Are supports needed for these models?
Some arms, brackets and trim pieces print with overhangs and need supports, while flat plates often do not. The model page or the included files usually indicate this.
How do I find a mount for a specific setup?
Search by the mounting position and the surface type, such as ceiling, wall or desk, then add the kind of screen. Related terms like hanger, bracket or clamp bring up different designs.
İlgili
Pratik gereçler

3D Models for Projector Mounts and STL Parts

9407 model
Ev ve yaşam

Projector Stand and Mount 3D Models for Printing

2959 model
Ev ve yaşam

Projector Brackets: 3D Models for Mounting

202074 model
Elektronik

Stevenson Screen 3D Models for Weather Sensors

1668 model
Yazıcı parçaları

Flashforge AD5X Screen Parts: STL Models to Print

211073 model
Pratik gereçler

Mini Projector for Smartphone: 3D Models and STL Files

2140 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç