Mutfak

Meat Grinder Gearbox Gears: 3D Models and STL Files

This collection gathers 3D models tied to meat grinder gearboxes: replacement gears, small reducers, adapters and related transmission parts. It is useful when a plastic gear inside an appliance wears out and you want to print a substitute instead of replacing the whole unit. The listings come from several platforms, so the same mechanism may appear in different forms. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 40 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2256 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2256 model
Kategori hakkında

«Meat Grinder Gearbox Gears: 3D Models and STL Files»

The models fall into a few groups. Some are single gears taken from a grinder reducer, others are complete multi-stage gearboxes or reducer assemblies for small motors, and a third group covers adapters and couplings that link an appliance to a drive. Toy gears and fidget mechanisms appear too, and they differ mainly in size, tooth profile and how the parts are joined.

Before printing, compare the model with the broken part. Check the tooth count and module, the bore diameter, the hub and keyway shape, the overall thickness, and how many separate parts the assembly contains. On the author's page, look at the stated material and print settings, whether supports are needed, and photos of actual prints, since a gear that fits the shaft can still differ in tooth geometry.

If the first search gives little, widen it. Try synonyms such as pinion, cog, worm wheel, reducer, transmission or drive gear, and related phrases like appliance repair part, motor coupling or auger drive. Searching by the mechanism type rather than the appliance name often brings up more results, and browsing the gearbox and kitchen categories helps as well.

FAQ

Sıkça sorulan sorular

How do I find a gear that matches my grinder's reducer?
Measure the original part and compare tooth count, module, bore and hub shape with the dimensions the author lists. Photos of the model next to a ruler are the most useful reference.
Do these gears need supports when printed?
It depends on the orientation the author chose. Many gear models are placed flat on the build plate, but the model page usually states the orientation and whether supports are required.
Which material should I use for a gear under load?
Authors often list the filament and settings they used, so start there. Keep in mind that a gear inside a grinder works under load and heat, and thin teeth are more sensitive to layer direction.
Can I search by the appliance name instead of the part?
You can, but appliance names vary between markets and generations. Searching by mechanism type, such as reducer gear or motor gearbox, usually returns more comparable results.
İlgili
Mutfak

Mekanik et öğütücü redüktör dişlisi 3D model

39989 model
Mutfak

Kebap 3D model ve STL dosyaları

342 model
Mutfak

Hamur Kazıyıcı 3D Model ve STL Dosyaları

1318 model
Mutfak

Yuvarlak kupa tutucu için 3D model ve STL dosyaları

549710 model
Mutfak

Dolce Gusto kapsül tutucu 3D model ve STL dosyaları

2432 model
Mutfak

5 litrelik su dispenseri için 3D model

2937 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç