Elektronik

3D Models for Fan Grills and Fan Covers to Print

This collection gathers 3D models that sit over a fan: guards, covers and grills for PC cases, small electronics and printer toolheads. Most are simple flat parts, which makes them a quick subject for 3D printing. The variety is in the pattern, the size and how much air the design lets through. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 75590 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 75590 model
Kategori hakkında

«3D Models for Fan Grills and Fan Covers to Print»

The models fall into a few groups. There are grills for standard case fans in the usual widths, small guards for compact fans around 30 to 40 mm, and covers made for specific printer toolheads or auxiliary fans. Patterned versions — honeycomb, hex, angular louvres — differ mainly in how much material blocks the opening, while plain ring or bar guards leave more of the face open.

Before printing, compare the mounting hole spacing and the outer diameter on the model page with your own fan, and note the thickness, since a thick guard can sit close to a blade or a cable. Look at whether the author shows supports in the photos or states that the part prints flat, and read the material and settings they list. Photos of finished prints are the most useful guide to how the openings and edges come out.

If a search returns too little, try other words for the same object: fan guard, finger guard, fan cover, shroud or dust filter. Adding a size, a fan width or a pattern name narrows the list quickly. Related searches such as cooling, ventilation, case modding or toolhead cooling often lead to designs that a plain fan grill query misses.

FAQ

Sıkça sorulan sorular

How do I check that a fan grill will fit my fan?
Compare the mounting hole spacing, the outer diameter and the thickness given on the model page with the measurements of your fan. Measuring the fan and its screw holes before printing saves a reprint.
Do fan grills need supports?
Many are flat enough to print without them. Designs with raised rims, deep louvres or a curved profile may need supports, so check the author's notes and photos before starting.
Which material is used for a fan grill?
It depends on where the fan sits. Cooler spots are often printed in common rigid filaments, while warmer areas call for a filament with a higher working temperature. The author's listed settings are the starting point.
Can the size or pattern of a grill be changed?
Some files are parametric or include editable source files, so the diameter, hole spacing or pattern can be adjusted. Check the file list on the model page to see what is included.
İlgili
Elektronik

Fan 3D Models: Hand Fans, Grills and Ducts

326145 model
Elektronik

8-Inch Speaker Grills: 3D Models and STL Files

62573 model
Elektronik

PC Fan 3D Models: Mounts, Filters and Ducts

87461 model
Elektronik

3D Models for Fan Builds: Grills, Stands and STL

2249 model
Yazıcı parçaları

Fan Covers for 3D Printers: STL Models to Browse

165947 model
Elektronik

Speaker Grill STL Models for 3D Printing

3274 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç