Taşıtlar

3D Models for Fenders and Mud Guards

This collection gathers STL files for fenders, mud guards and inner fenders used on RC cars, robot mowers, bicycles, carts and trucks. It helps you compare shapes for a particular body or wheel setup before starting a 3D printing job. Check the author's page for dimensions, mounting points and recommended material. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 17558 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 17558 model
Kategori hakkında

«3D Models for Fenders and Mud Guards»

Fender models range from thin inner liners for scale RC bodies to wider mud guards for robot mowers and utility carts. Some are single-piece shells that cover a wheel, while others are split into left and right parts or include separate mounting tabs. Bicycle and scooter fenders tend to follow a curved profile, whereas truck and off-road body fenders often need larger clearances around big wheels.

Before printing, read the model page for overall size, wheel diameter, mounting hole spacing and the number of parts. Check whether the author shows the fender on a real build, and note the material and layer height they used. Thin fenders can flex or warp, so orientation and wall count matter as much as the outer shape.

If a direct search gives few results, try terms such as mud guard, wheel arch, inner liner, fender flare or splash guard. Adding the vehicle type, wheel size or body style narrows the list, and related searches for bumpers, body shells or chassis parts can lead to matching designs. You can also look for remixes and variants that adjust width, mounting points or coverage.

FAQ

Sıkça sorulan sorular

What is the difference between a fender and a mud guard?
A fender usually covers the top and sides of a wheel, while a mud guard is often a smaller flap or panel behind the wheel. In 3D model collections, the terms are sometimes used interchangeably.
How do I choose the right size for a 3D printed fender?
Measure the wheel diameter, tire width and the distance between mounting points on your model. Compare those measurements with the dimensions listed on the author's page before printing.
Can fenders be printed in flexible filament?
Flexible materials can work for parts that need to bend or absorb light impacts. Rigid filaments are common for inner fenders and larger body panels, but the choice depends on the model and the author's notes.
What should I check if a printed fender does not match the intended body?
Compare the printed part against the listed scale and mounting points, then check whether the model was designed for a specific body or wheel setup. A remix or a scaled version may address the difference.
İlgili
Taşıtlar

KTM Fender 3D Models and STL Files for Motorcycles

5363 model
Müzik

3D Models for Fender Hooks and Wall Mounts

12436 model
Taşıtlar

Fender Liner STL Models for 3D Printing

3412 model
Taşıtlar

Rail Hook 3D Models: Fender, Keder and Utility STL

3565 model
Spor ve fitness

Bicycle Fender Mount 3D Models and STL Parts

549639 model
Spor ve fitness

Handrail Hook for Fender: 3D Models and STL Files

2573 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç