Nesneler

1/4 Tube Fittings: 3D Models for Threads and Barbs

This collection gathers 3D models for 1/4 tube fittings, from threaded adapters to barbed connectors and multi-way junctions. It is useful when you need a custom part for a workshop, garden or machine setup and plan to make it on a 3D printer. The files vary in thread standard, connection type and assembly, so the collection works as a starting point for comparing options. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 336590 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 336590 model
Kategori hakkında

«1/4 Tube Fittings: 3D Models for Threads and Barbs»

Threaded adapters appear in male and female variants, often with NPT or BSP threads, and can reduce or extend a connection. Barbed fittings connect flexible hose or tube, while multi-way parts such as tees, crosses, elbows and wyes split or redirect a line. Caps, straps and garden-hose adapters cover closing, mounting or converting between thread types.

Before printing, check the thread standard, nominal size and pitch on the author's page, because a 1/4 label alone may refer to different systems. Look at wall thickness, thread length and whether the model needs supports or separate parts for assembly. The material and settings listed by the author, along with photos of real prints, help you judge how the part may behave under load or pressure.

To narrow results, combine the size with the connection type, for example threaded adapter, hose barb, tee or elbow. Related terms include pipe fitting, tube fitting, NPT, BSP, GHT, reducer, extender and cap. If you need a specific route, search for cross, wye, 4-way or 5-way in addition to the basic size.

FAQ

Sıkça sorulan sorular

What does 1/4 mean in tube fittings?
It can refer to a nominal thread size, a hose inner diameter or a tube outer diameter, depending on the standard. Check the author's notes and dimensions before choosing a model.
Which thread standards appear in these models?
Models often use NPT, BSP or GHT threads, and some combine two standards in one adapter. The thread type and pitch are usually listed on the model page.
What should I check before printing a fitting?
Review the thread standard, nominal size, wall thickness and whether supports or separate parts are needed. Also compare the author's material and settings with photos of real prints.
Can I mix thread types in one assembly?
Mixing thread types usually requires an adapter made for that conversion. Verify the dimensions and thread profiles so the parts meet as intended.
İlgili
Nesneler

Pipe Fitting STL Models for 3D Printing

20046 model
Nesneler

3D Printing Fittings: Pipe, Hose and Pneumatic STL Models

53302 model
Alet ve ekipman

1/2 Inch Fitting STL Models for 3D Printing

12770 model
Nesneler

Tube Clamps and Holders: STL Files for 3D Printing

213338 model
Yazıcı parçaları

Tube Holder 3D Models and STL Files

484788 model
Nesneler

Tube Connection 3D Models: STL Fittings and Adapters

5045 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç