Elektronik

Flexible GoPro Mounts: 3D Models and STL Files

This collection gathers 3D models for flexible action-camera mounts: TPU brackets, drone holders, helmet and bike fittings, and adapters to standard threads. Most of them are small parts that a 3D printer can produce in a single run, which makes them practical when a stock mount does not fit your setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 11384 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 11384 model
Kategori hakkında

«Flexible GoPro Mounts: 3D Models and STL Files»

The models differ mainly in how they attach and how much give they allow. Low-profile brackets and TPU holders bend with the camera, while drone mounts are shaped around a specific frame and often hold the camera at a fixed angle. Helmet, bike and vehicle mounts add straps, clamps or pipe fittings, and thread adapters convert the camera fingers to a tripod or arm screw.

Before printing, open the model page and look at the listed dimensions and the camera it was drawn for, since action cameras vary in width and button layout. Check how many parts are involved, whether they are screwed or glued together, and whether the author recommends supports. The material matters too: flexible filaments behave differently from rigid ones, so read the suggested material, wall count and infill, and compare them with photos of actual prints.

If the results feel narrow, try related wording such as action camera mount, TPU bracket, camera fingers, ball joint or 1/4-20 adapter. Searching by the device you want to attach the camera to, for example a helmet, handlebar or drone frame, usually brings up different sets of models than a search by camera name alone.

FAQ

Sıkça sorulan sorular

Which filament works for a flexible GoPro mount?
Flexible models are usually drawn for TPU or a similar soft filament, while rigid brackets are printed in PETG, ABS or PLA. The author's page normally states which material the geometry was designed around.
Do these mounts need supports?
It depends on the shape. Flat brackets and two-part designs often print without them, while angled drone mounts and clamps may include overhangs that need support. Check the print notes and the orientation shown in the photos.
How do I know the mount fits my camera?
Compare the listed dimensions with your camera body and its mounting fingers. Some models are drawn for a specific camera generation, and small differences in width or button placement can affect how the holder sits.
Can I adapt a GoPro mount to a tripod or arm?
Yes, there are adapters that convert the camera fingers to a 1/4-20 thread or to a ball joint. Check the thread size and the load the part is meant to carry before printing.
İlgili
Pratik gereçler

Drone GoPro Mount STL Files: FPV Brackets and Adapters

12615 model
Pratik gereçler

LS2 GoPro Mounts: 3D Printed Helmet and Bike STL Files

12444 model
Pratik gereçler

3D printing GoPro chin mounts for LS2 helmets

2150 model
Pratik gereçler

GoPro 3D Models: Mounts, Cases and Adapters

22148 model
Pratik gereçler

GoPro 9 Cases and Mounts: 3D Models to Print

3810 model
Pratik gereçler

GoPro Mounts for DJI Mavic: 3D Printing STL Files

2545 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç