Elektronik

FPV Battery Holders and Cases: STL Files to Print

This collection gathers STL files for FPV battery cases, holders, charging hubs and connector caps. You can compare how different designs handle cell sizes, mounting points and cable routing before printing. It helps you find a practical part for your 3D printer and your gear. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 5357 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5357 model
Kategori hakkında

«FPV Battery Holders and Cases: STL Files to Print»

The models fall into a few practical groups: enclosures that protect a battery pack, mounts that attach a pack to goggles or a frame, charging hubs and organizers, and small caps or adapters for power connectors. Some designs hold a single cylindrical cell, while others are shaped around a soft pack or a specific device. The differences usually show up in wall thickness, latch or strap points, and how much of the battery remains exposed.

When choosing a model, start with the battery dimensions and the space where it will sit. Check the number of parts, whether assembly uses screws, straps or glue, and whether the author notes supports, orientation or material. Look at photos of real prints and read the listed settings, because a small change in scale can affect fit and connector clearance.

To refine your search, try related terms such as battery tray, battery guard, goggle battery mount, power bank case, charging station or connector cap. You can also search by cell format, connector type or the device the battery belongs to. If a result is close but not exact, check the author's page for updated files and notes before printing.

FAQ

Sıkça sorulan sorular

What should I measure before printing an FPV battery holder?
Measure the battery pack itself, the mounting area on your goggles or frame, and the space around the connector. Cable exit direction and strap thickness can matter as much as length and width.
Do FPV battery cases usually need supports?
It depends on the shape and orientation. Many authors state whether supports are needed and which way to place the model on the plate.
Can I scale a battery holder to fit a different pack?
Scaling changes wall thickness, screw holes and connector openings, so it may not fit well. A model drawn for that cell format or pack size is usually easier to work with.
What materials are used for FPV battery mounts?
Authors often list materials such as PETG, ABS, ASA or TPU. The choice depends on where the part sits and how much flex or heat resistance you need.
İlgili
Elektronik

Battery Holder STL Models for 3D Printing

115887 model
Elektronik

Battery housing STL files for 3D printing

161296 model
Elektronik

Battery Adapter STL Models for 3D Printing

106189 model
Taşıtlar

3D Models of Car Batteries, Covers and Holders

13443 model
Elektronik

40138 Battery Holders: 3D Models and STL Files

3025 model
Elektronik

Battery Spotlight 3D Models and STL Parts

11453 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç