Genel arama

FPV Ball 3D Models: Turrets, Skids and Mounts

This collection gathers 3D-printable parts that put a ball shape to work on an FPV drone: dome turrets for cameras, ball skids, motor bell tools and small holders. The files come from several platforms, so the amount of detail on each model page varies. It is a starting point for 3D printing spares and add-ons rather than a single build guide. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 3812 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3812 model
Kategori hakkında

«FPV Ball 3D Models: Turrets, Skids and Mounts»

Ball turrets and dome housings cover a camera while leaving it adjustable, and they usually differ from plain mounts in part count and in how the camera is fixed inside. Skids and landing feet take a ball or bearing form so the drone slides over hard ground, and some are printed in a flexible filament. A separate group covers tools for motor work, such as bell grippers and removers, along with holders for cameras, antennas and cables.

Before printing, open the author's page and read the listed dimensions, the number of parts and whether supports are needed. Check the material and settings the author names, because a gripper or a skid behaves differently in rigid and flexible filament. Photos of real prints show how the ball seat, the screw holes and the cable routing came out.

If the results are thin, try related wording: drone turret, camera dome, landing skid, motor bell tool, antenna holder, or the frame size you use. Adding a camera model, a motor size or a frame class narrows the list. Titles also appear in other languages, so a translated keyword can surface files that English queries miss.

FAQ

Sıkça sorulan sorular

What is an FPV ball turret used for?
It holds a camera in a rounded housing that can be angled or turned. Check the model page for the camera dimensions and the mounting pattern before printing.
Which filament works for ball skids?
Authors often list a flexible filament for parts that take landings, and a rigid one for tools. The material and settings are usually stated on the model page.
Do these models need supports?
It depends on the geometry. Domes, turrets and hollow ball shapes often do, while flat skid plates may not. The author's notes and print photos are the quickest way to tell.
Can I scale a model to fit my drone?
Scaling changes hole diameters, wall thickness and any thread or bearing fit. Compare the listed dimensions with your frame first, then adjust only if the part has no tight interfaces.
İlgili
Fandom

Steel Ball 3D Models: Bearings, Props and Fidgets

54196 model
Alet ve ekipman

FPV Stand 3D Models: Launch Pads and Desk Stands

514289 model
Hobi ve kendin yap

FPV Holder 3D Models: Goggles, Batteries, Mounts

5525 model
Taşıtlar

3D Printed Hitch Ball Covers: STL Models to Browse

4442 model
Pratik gereçler

FPV Keychain 3D Models and STL Files

178766 model
Oyuncaklar ve figürler

Ball Joint Doll 3D Models and STL Files

6324 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç