Alet ve ekipman

Washer and Grip STL Models for 3D Printing

This collection gathers STL files for washers, spacers and related parts, from fully parametric designs to fixed metric sets. It helps when you need a small part for a repair, a project or a 3D printing experiment and want to adjust dimensions before printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2256 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2256 model
Kategori hakkında

«Washer and Grip STL Models for 3D Printing»

Parametric washers are defined by a few values you set yourself, so one file can cover many diameters and thicknesses. Metric sets instead arrive as groups of fixed sizes, often arranged on a card or a single plate. Plastic washers for repairs and craft work tend to be simple flat shapes, while grip and accessory parts for sport pistols follow the contours of a specific frame.

Before printing, read the model page for inner and outer diameter, thickness and thread size, since a small difference changes how a part sits. Check how many parts the file contains, whether the author used supports, and which filament and settings they list. Photos of real prints show surface finish and how the part behaves better than a render does.

If a search returns little, try other names for the same object: spacer, shim, gasket, cap, nozzle or spray jet. Adding a thread size such as M3 or M12, or a system name, narrows the list. Related topics like washer bottles, pumps and mounting clips can lead to parts filed under different wording.

FAQ

Sıkça sorulan sorular

What should I check before printing a washer?
Look at the inner and outer diameter, thickness and thread size on the model page, and compare them with the part you are replacing. The author's notes on material and layer height help you judge how the print will behave.
Which filament do people use for printed washers?
Rigid filaments are common for spacers and flat washers, while flexible ones appear where some give is wanted. The model page usually names the filament and settings the author used, so start there.
Can a printed part replace a metal washer?
It depends on the load and temperature in that spot, so treat printed parts as a separate case and test them. Check the dimensions and the author's notes rather than assuming a direct swap.
How do I find parts for a car's washer system?
Search by the part name and its synonyms, such as nozzle, spray jet, pump or cap, and add the thread or connector size if you know it. Photos and dimensions on the model page help you compare before printing.
İlgili
Taşıtlar

GAC GS8 3D Models: Interior Parts and GS Accessories

48460 model
Yazıcı parçaları

GAC GS8 Cover 3D Models and STL Files

4472 model
Pratik gereçler

GAC GS8 II 3D Models and Car Accessory STL Files

1395 model
Taşıtlar

GAC Trumpchi GS8 3D Models and STL Files

2140 model
Taşıtlar

GAC GS8 Car Organizer 3D Models and STL Files

1450 model
Taşıtlar

GAC GS8 Key Fob 3D Models and STL Files

2807 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç