Oyuncaklar ve figürler

LEGO-Style Gears and Technic STL Models

This collection gathers STL files for gears and related parts built around LEGO-style and Technic-style geometry. It covers single gears with fixed tooth counts, racks, compound gears and motor adapters, so you can build a gear train for 3D printing. The collection helps when a particular tooth count or ratio is hard to find as a physical part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 43 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2702 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2702 model
Kategori hakkında

«LEGO-Style Gears and Technic STL Models»

Gear models here fall into a few families. Spur and bevel gears carry a fixed tooth count, from small pinions up to large rings, and the tooth profile decides how they mesh with neighbouring parts. Racks and pinions convert rotation into straight travel, while double and compound gears place two tooth counts on one body to set a ratio. Motor adapters and clutch parts sit between a gear train and a shaft.

Before printing, open the author's model page and read the stated dimensions: outer diameter, tooth count, bore or axle hole and overall thickness. Check whether the download is one part or a set that needs assembly, and whether the geometry calls for supports. Tooth profiles are thin, so the material and settings the author lists, along with photos of real prints, tell you more than the render does.

You can narrow the search by tooth count, gear type or the system the part belongs to. Synonyms are worth trying: spur gear, pinion, bevel gear, worm, differential, axle, motor adapter. Related topics include gearboxes, planetary reductions, turntables, tracked drives, and figure or accessory packs that use the same connection points.

FAQ

Sıkça sorulan sorular

What tooth counts appear in these gear models?
Titles mention a spread from small pinions to large rings, usually written as a number followed by T. The count is the first thing to match when you pair two gears.
Do printed gears need supports?
It depends on the file and on how you orient it. Flat gears often print without them, while hubs, axles and racks may need them; the author's page usually says which case applies.
Will these parts fit existing building sets?
Many models are drawn around Technic-style geometry with axle holes and common tooth profiles. Printed tolerances vary between machines, so test a small part first and read the author's notes on scale.
Which material is used for printed gears?
Authors usually name a material on the model page. Stiff filaments are common for display parts, while gears that carry load are often printed in tougher ones; the listed settings are the starting point.
İlgili
Oyuncaklar ve figürler

LEGO Gear Box 3D Models and STL Files

233099 model
Oyuncaklar ve figürler

LEGO 3D Models: STL Stands, Mounts and Parts

329654 model
Oyuncaklar ve figürler

LEGO-Style STL Models for 3D Printing

45711 model
Oyuncaklar ve figürler

LEGO Holder 3D Models: STL Files for Stands and Bases

475480 model
Hobi ve kendin yap

3D Models of Gear Boxes and Reducers

189576 model
Oyuncaklar ve figürler

Lego Hair 3D Models: Minifig and Maxifig STL Files

38356 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç