Taşıtlar

Sealed Cable Passages for Boats: 3D Models and STL Files

This collection gathers STL files for sealed cable passages used on boats, from hull and deck glands to junction boxes and solar roof entries. It helps you find parts for routing power, data and antenna cables through panels and bulkheads. Check the author's page for dimensions, gasket type and assembly details before printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 6237 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 6237 model
Kategori hakkında

«Sealed Cable Passages for Boats: 3D Models and STL Files»

The collection covers several kinds of cable passages: glands and grommets for single cables, multi-cable junction boxes, solar roof entries, routing covers, and outboard cowling grommets. They differ by mounting surface, cable diameter, number of cables, and whether they use a compression nut, a gasket groove, or a screw-down lid. Some are round and drop into a drilled hole; others are rectangular and screw onto a panel.

When choosing a model, check the cable outer diameter, panel thickness, hole shape, and clearance for the connector. On the author's page, look at the number of parts, assembly steps, whether supports are needed, and the material and settings the author lists. Photos of real prints can show how the seal sits and how the cover closes.

To refine the search, try synonyms such as cable gland, cable grommet, pass-through, bulkhead fitting, deck seal, cable port, and cable capsule. Related terms include junction box, solar entry, cable routing channel, and outboard cable grommet. You can also search by the surface or cable type, for example deck, hull, panel, antenna, or power cable.

FAQ

Sıkça sorulan sorular

What should I measure before printing a boat cable passage?
Measure the cable outer diameter, the panel or bulkhead thickness, and the hole size you can drill. Also check the connector size and the space needed for a gasket or sealant.
Do these models need supports?
It depends on the orientation and overhangs. The author's page may state whether supports are needed and where to place them.
How is a sealed cable passage assembled?
Many designs use a gasket, O-ring, or sealant channel between the body and the mounting surface. A compression nut or screw-down cover then presses the cable or seal into place.
Can I use standard cable glands with 3D printed parts?
Some models are built around standard gland threads, while others use printed threads or a separate nut. Check the thread size and pitch on the model page before printing.
İlgili
Elektronik

Sealed Cable Pass-Through 3D Models and STL Files

54242 model
Elektronik

3D model: su geçirmez kablo kutusu ve rakor

54713 model
Elektronik

Su geçirmez kablo rakoru 3D model ve STL dosyaları

10911 model
Taşıtlar

3D Models of Boats: STL Files for Printing

12499 model
Taşıtlar

Tekne için 3D model: PVC bot ve balıkçı aksesuarları

58904 model
Ev ve yaşam

3D model kablo tutucu STL dosyaları

620093 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç