Pratik gereçler

GoPro Cross Mounts: 3D Models and STL Files

This collection gathers STL files for GoPro cross mounts and related action-camera brackets. You will find helmet mounts, bar extensions, adapters and small mounting parts. It helps when you need to adapt a camera to a specific helmet, bar or accessory. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2476 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2476 model
Kategori hakkında

«GoPro Cross Mounts: 3D Models and STL Files»

The models range from simple helmet brackets to crossbar extensions and multi-part adapters. Some are single pieces that clamp to a bar, while others combine a base, arm and camera interface. Mounts for bags, fences or vehicle vents use different clamping ideas than helmet mounts.

When choosing a model, check the listed dimensions, the number of parts and whether assembly hardware is described. Look at the author's photos of real prints and read the recommended material and settings. If the mount will hold a camera at speed or on rough ground, consider how the load is distributed and whether the design needs supports.

To refine the search, try synonyms such as action cam bracket, helmet adapter, crossbar mount or camera clip. Related terms like vent mount, fence mount, gimbal adapter or extension arm can surface other designs. Combine the camera name with the part you need, and check the model page for scale before printing.

FAQ

Sıkça sorulan sorular

What is a GoPro cross mount?
It is a bracket or adapter that positions an action camera on a crossbar, helmet rail or similar support point. Designs vary from a single clamp to a multi-part arm with a camera interface.
How do I choose the right mount for my helmet?
Check the helmet model and the mounting area shown on the model page. Compare the listed dimensions and the number of parts, and look at photos of the printed result.
Do these models need supports when printing?
Some designs print without supports, while others include overhangs that may need them. The author's page usually notes the orientation and any support requirements.
Can I use these mounts for other action cameras?
Many designs use a standard camera interface, but the fit depends on the camera body and housing. Check the model page for the interface type and dimensions before printing.
İlgili
Taşıtlar

T-Cross 3D Models: Pipe Fittings, Brackets, Keychains

4823 model
Pratik gereçler

GoPro 9 Cases and Mounts: 3D Models to Print

3810 model
Pratik gereçler

GoPro 3D Models: Mounts, Cases and Adapters

22148 model
Pratik gereçler

GoPro Holder 3D Models and STL Mounts to Print

433823 model
Taşıtlar

3D Printed Pipe Fittings: T-Cross and Tee STL Models

2814 model
Taşıtlar

Cross Polo 3D Models and STL Files

2544 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç