Elektronik

3D Models for GPS and FPV 10-Inch Drone Mounts

This collection covers 3D-printable parts for GPS and FPV setups on 10-inch drones. You will find mounts, holders, canopies and frame accessories that help place a GPS module and antennas on a build. It is useful when you are planning a 3D printing session for a large FPV quadcopter. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 7812 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 7812 model
Kategori hakkında

«3D Models for GPS and FPV 10-Inch Drone Mounts»

The reference points to several families of parts: standalone GPS module mounts, combined antenna and GPS brackets, canopy or tail holders, and frame or arm pieces for larger FPV builds. Some are designed for a specific frame geometry, while others use a clamp or strap around a tube or arm. Action-camera protection and mounting parts also appear alongside these GPS-focused items.

Before printing, check the model page for the module dimensions, hole spacing and mounting pattern, because GPS units vary in size. Look at the number of parts, how they assemble, and whether the author lists supports or particular print settings. Photos of real prints can show clearances, wall thickness and how cables or antennas are routed.

If you need a different layout, try related terms such as GPS holder, antenna mount, tail mount, canopy mount or long-range FPV. You can also search by frame size, arm thickness or module family to narrow the results. Combining a GPS term with a part type often returns more focused models than a single broad query.

FAQ

Sıkça sorulan sorular

What should I measure before printing a GPS mount for an FPV drone?
Measure the GPS module footprint, mounting hole spacing, and the frame arm or plate where it will attach. Check cable exit direction and antenna clearance.
Can a GPS mount also hold an antenna or beeper?
Some designs combine those functions, but the layout depends on the frame and the parts used. Check the model page for the included features and assembly.
How do I choose between a canopy mount and an arm mount?
Canopy and tail mounts often keep the GPS higher and away from power wiring, while arm mounts sit closer to the frame. The choice depends on your frame geometry, wiring route and how you want to access the module.
What search terms help find related 10-inch FPV parts?
Try GPS holder, antenna bracket, tail mount, frame arm, canopy, or long-range FPV mount. Adding the frame size or arm dimension can reduce unrelated results.
İlgili
Hobi ve kendin yap

GPS and FPV Drone 3D Models and STL Parts

25987 model
Elektronik

10-Inch FPV Drone 3D Models and STL Parts

91448 model
Hobi ve kendin yap

10-Inch FPV Drone 3D Models and STL Parts

82962 model
Pratik gereçler

3D Models for GPS Modules, Cases and Mounts

17196 model
Elektronik

3D Printed GPS Cases: STL Files for Trackers

102351 model
Elektronik

3D Models for 10-Inch FPV Frames and Mounts

2587 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç