Ev ve yaşam

65 mm Grommet STL Models for Desks and Panels

This collection gathers STL files for grommets sized around 65 mm, from desk cable rings to panel and hose inserts. You can compare how each design handles covers, connector cutouts and mounting. It is useful when you need to replace a worn grommet or adapt an existing opening on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2150 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2150 model
Kategori hakkında

«65 mm Grommet STL Models for Desks and Panels»

Desk grommets usually come as a ring with a separate cover, while pass-through versions add openings for connectors. Rubber and bulkhead grommets are shaped for panels, hoses or fairings and often have a different cross-section. Low-profile designs sit close to the surface and may use a simple press-in shape.

Before printing, check the listed outer diameter, inner opening and wall thickness against your own measurement. Look at the part count: some designs are a single piece, others include a ring, cover or insert that must be assembled. The author page may note material, layer height, and whether supports are needed; photos of real prints help you judge the shape.

If the first results are too broad, try terms such as cable pass-through, desk ring, wire grommet, panel bushing or rubber insert. Adding the opening size or the surface type, like desk, wall or fairing, narrows the list. Related searches include cable management, port inserts and hole covers.

FAQ

Sıkça sorulan sorular

How do I measure for a 65 mm grommet?
Measure the hole diameter at its widest point and the panel thickness. Compare those values with the dimensions on the model page, since the outer rim and inner opening can differ.
What is the difference between a desk grommet and a cable pass-through?
A desk grommet often has a ring and cover to line a hole. A pass-through may include cutouts or separate inserts for connectors such as USB or network ports.
Can I print a grommet in flexible material?
Some designs use rigid filament for a clean ring, while others are shaped for flexible material to grip a panel or hose. Check the author's notes and photos for the intended material.
How do I adapt a model to a different hole size?
You can scale the STL in your slicer, but scaling changes wall thickness and connector openings. If the design has separate parts, adjusting only the outer ring may be a better route.
İlgili
Ev ve yaşam

3D Printed Grommets: Desk, Wall and Cable STL Models

5487 model
Ev ve yaşam

Door Grommet 3D Models and STL Files to Browse

2694 model
Ofis ve çalışma masası

Desk and Wall Cable Grommet 3D Models to Print

1989 model
Pratik gereçler

BetaFPV Air 65 3D Models: Canopies, Cases, Holders

34822 model
Hobi ve kendin yap

BetaFPV Air 65 Box and Case STL Models for 3D Printing

202601 model
Ev ve yaşam

Bandage Holders and Rollers: 3D Models to Print

2738 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç