Elektronik

GTX 1080 Ti Palit 3D Models: Shrouds and Backplates

This collection gathers STL files built around the GTX 1080 Ti Palit and nearby graphics cards. Inside are fan shrouds, fan adapters, backplates, brackets and a few full card models for 3D printing. It is useful when you want to change the fan size, cover an exposed board or add a part the original cooler does not include. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 1800 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1800 model
Kategori hakkında

«GTX 1080 Ti Palit 3D Models: Shrouds and Backplates»

Fan shrouds and adapters form the largest group: they change the fan diameter, raise or lower the fan position, or reshape the cover above the heatsink. Backplates and covers are a second group, usually flatter parts that sit on the rear of the card. Brackets and mounts make up a third, including pieces for water blocks and small-form-factor builds, while a fourth group is made of scale or display models of the cards themselves.

Before printing, compare the dimensions on the model page with your own card: fan hole spacing, shroud height, screw positions and clearance around the board. Look at how many parts a model has and whether they join with screws or glue, and read the material and settings the author lists. Photos of printed parts are the quickest way to judge how a shroud or backplate sits in practice.

If the exact card is missing from the results, search by synonyms: GPU, graphics card, cooler shroud, fan adapter, backplate, bracket, or the fan size in millimetres. Related topics such as ITX cases, open-frame cases, fan ducts and other GPU generations often lead to parts that can be scaled or edited. Adding the cooler name or the card series narrows the list further.

FAQ

Sıkça sorulan sorular

What should I measure before printing a fan shroud?
Fan hole spacing, fan diameter, the height of the shroud above the heatsink and the distance to the board. Compare those numbers with the dimensions listed on the model page.
Do printed fan adapters change the fan size?
Many adapters translate between two fan diameters, for example a smaller stock fan and a larger case fan. Check the inlet and outlet sizes and the mounting hole pattern before you print.
Do these models need supports?
It depends on the overhangs in each part. Shrouds with wide openings often print without them, while brackets and ducts may need them, and the author's notes usually say what was used.
How can I find a part for a card that is not listed?
Search for the card series, the cooler name or the fan size instead of the full model name, and look at backplates, shrouds and brackets separately. Related searches such as GPU fan duct or graphics card cover often return usable starting points.
İlgili
Elektronik

GTX 1080 3D Models: Supports, Shrouds and Kits

1691 model
Elektronik

GTX 650 Ti 3D Models: GPU Parts and Accessories

1338 model
Elektronik

GTX 650 Ti Turbo 3D Models and STL Files

1286 model
Elektronik

650 Ti 3D Models: Covers, Adapters and Trim Parts

1273 model
Elektronik

RTX 2080 Ti 3D Models: Brackets, Shrouds, Supports

1279 model
Elektronik

3D Models for PCB800099 LCD Controller Housings

1593 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç