Alet ve ekipman

Hold-Down Clamps for CNC and Laser Tables: STL Files

This collection gathers printable hold-down clamps used to fix workpieces on CNC tables, laser beds and workbenches. The models range from simple G-clamps to low-profile clamps shaped around honeycomb beds. It is useful if you already own a 3D printer and want to make your own workholding instead of buying it. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 5053 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5053 model
Kategori hakkında

«Hold-Down Clamps for CNC and Laser Tables: STL Files»

The designs differ mainly in how they attach to the machine. T-slot clamps use a bolt that slides into the table profile, honeycomb clamps are kept flat so the laser head can pass over them, and G- or C-clamps rely on a screw thread and a wide jaw. Kits and stepped risers combine several parts to reach different heights, while parametric versions let you enter your own dimensions before exporting an STL.

Before printing, compare the model against your setup: slot width, table or bed thickness, bolt head size and the reach of the jaw. Look at the number of parts, whether the thread is printed or takes a metal screw, and whether the author expects supports. The model page usually lists the material and settings used, and photos of real prints show how the clamp sits on a table.

If the first search is too narrow, try related terms such as workholding, fixture, cam clamp, toggle clamp or spoilboard clamp. Adding the machine type, the table profile or the bed style narrows results further, and searching for the hardware you already have, such as a specific bolt or screw size, often brings up matching designs.

FAQ

Sıkça sorulan sorular

What should I check before printing a hold-down clamp?
Check the slot or bed dimensions it was drawn for, the bolt or screw it accepts, and the clamping height. The author's page usually states these along with the material and settings used.
Do printed hold-down clamps need supports?
It depends on the geometry. Many are modelled to print flat with no overhangs, while others have jaws or bridges that need support. The model page or the print notes usually say which case applies.
Which filament works for a printed clamp?
Authors list different materials depending on stiffness and temperature at the machine. Stiffer filaments resist bending under load, while some designs are meant to flex slightly. Follow the material named on the model page.
Can I scale a clamp model to fit my table?
Scaling changes bolt holes, threads and wall thickness, so a scaled clamp may no longer fit its hardware. Parametric versions that accept your own measurements are a safer route.
İlgili
Alet ve ekipman

Hold-Down Clamps for CNC, Laser and Woodworking: STL Models

11708 model
Alet ve ekipman

Hold-Down Clamps for CNC: 3D Models and STL Files

71398 model
Alet ve ekipman

Hold-Down Clamps: 3D Models for CNC and Hoods

4949 model
Alet ve ekipman

3D Printable Clamps: STL Models for Shop and Desk

177943 model
Alet ve ekipman

Clamp Mount 3D Models: STL Files for Desks and Pipes

13351 model
Alet ve ekipman

Pipe Clamp 3D Models: STL Files for Tubes and Conduit

84869 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç