Taşıtlar

Jimny Speaker Adapters and Spacers: 3D Models

This collection gathers 3D-printable parts for mounting speakers in Suzuki Jimny interiors: front door spacers, rear adapters and brackets that step up to larger drivers. Most of the models are small rings or plates, so they print quickly on a typical 3D printer and are easy to reprint if a hole pattern needs adjusting. It is aimed at anyone replacing tired factory speakers or fitting aftermarket ones where the original mounting points no longer line up. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 10583 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 10583 model
Kategori hakkında

«Jimny Speaker Adapters and Spacers: 3D Models»

The parts fall into a few groups. Front spacers sit between the door card and the driver, moving it outward and giving the magnet room. Rear adapters convert the factory opening to a round aftermarket cutout. A third group is drawn for larger drivers, usually around 165 mm, and a fourth covers related Suzuki models where the door or rear trim differs from the Jimny.

Before printing, read what the author states about the driver it was drawn for: nominal diameter, bolt circle, spacer thickness and overall depth. Depth matters most in a door, where a long magnet can meet the window glass or the door mechanism. Also check whether the file needs supports, how the author oriented it, and which material and settings they list, since a car interior gets hot. Photos of installed prints are the quickest way to judge fit.

If the results look thin, try other words for the same part: speaker ring, mount, plate, baffle or pod, alongside the model code such as JB74, JB33, JB43 or JA22. Adding a size, like 5.25 inch or 6.5 inch, narrows the list further. Related searches include door card trim, dash panels, subwoofer enclosures and speaker grilles, which often appear alongside these adapters.

FAQ

Sıkça sorulan sorular

What speaker sizes do these adapters cover?
The models are drawn for specific diameters, commonly 100 mm, 125 mm, 5.25 inch or 165 mm. Check the model page for the diameter and bolt spacing it was designed around before ordering speakers.
Do printed speaker spacers need supports?
Flat rings usually print without them, while taller brackets with overhangs may need support. The author's page often shows the intended orientation and whether supports were used.
Which filament is used for speaker adapters?
PLA can soften in a hot car interior, so PETG, ABS or ASA are often chosen instead. Look at the material and settings the author lists, and at photos of prints that have been installed.
Can a model be scaled to fit a different speaker?
Scaling changes bolt holes, wall thickness and screw bosses together, so the result may not line up. It is usually better to find a file drawn for that diameter.
İlgili
Taşıtlar

Suzuki Jimny 3D Models: STL Kits and Parts

1499 model
Elektronik

Speaker 3D Models: Horns, Housings, Mounts

32843 model
Taşıtlar

Suzuki Jimny 2019 3D Models and STL Files

1279 model
Taşıtlar

Jimny Fender Flares: 3D Models and STL Files

9015 model
Nesneler

Speaker Box 3D Models: STL Enclosures to Print

3638 model
Elektronik

Speaker Adapter STL Models for 3D Printing

4147 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç