Bahçe

Drip Irrigation 3D Models and STL Parts

This collection gathers STL files for drip irrigation: bottle adapters, spikes, connectors, and modular rings. It helps you find parts for slow watering in pots, beds, and small garden setups. You can compare designs before printing on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 7300 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 7300 model
Kategori hakkında

«Drip Irrigation 3D Models and STL Parts»

The models range from single bottle adapters and watering spikes to multi-part rings and modular line systems. Bottle-based designs rely on gravity and a small opening, while modular systems use tubing, tees, and emitters to reach several plants. Connectors and adapters join hoses or bottles, and clips hold lines near pots or beds.

Before printing, check the listed dimensions, thread type, and the bottle or hose size the author describes. Look at the number of parts, how they assemble, and whether the author shows supports or print orientation. Material notes matter: some parts need flexible filament for seals or clips, while rigid parts may use common PLA or PETG. Photos of real prints can show how the threads and joints fit.

To narrow the collection, try terms such as plant watering spike, bottle adapter, drip line connector, micro tubing, or garden irrigation. Related searches include self-watering planter, slow drip, and modular watering system. If you need a specific connection, search by the thread or hose size shown on the model page.

FAQ

Sıkça sorulan sorular

What is a drip irrigation model used for?
It controls how water moves from a bottle, tap, or container to a plant over time. Many designs use gravity or a small opening to create a slow drip.
What should I check before printing a drip irrigation part?
Check the thread size, hose diameter, and the bottle or tap dimensions listed by the author. Also review the part count, assembly steps, and any material notes.
Which filament is used for garden watering parts?
Authors often list PLA, PETG, or TPU depending on the part. TPU can be used for seals and clips that need to flex, while rigid parts are often printed in PLA or PETG.
How can I find a matching connector or adapter?
Search by the connection type, such as bottle thread, hose barb, tee, or tap adapter. The model page should list the dimensions and the parts the author used.
İlgili
Bahçe

3D Models for Watering: Cans, Drip Systems, STL

142253 model
Mimari ve maketler

3D Models for Floor Tiles, Stands and Fittings

65700 model
Ev ve yaşam

Log 3D Models: STL Files for Printing

20846 model
Bahçe

Garden Watering 3D Models: Cans, Spikes, Sprinklers

4601 model
Bahçe

Wick Watering 3D Models for Planters and Pots

44987 model
Bahçe

Wick Watering 3D Models for Planters and Pots

96679 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç