Alet ve ekipman

3D Printing Cases for Angle Grinder Discs: STL Files

This collection gathers 3D models for storing and carrying angle grinder discs, from single-wheel cases to multi-disc racks. Most files are made for desktop 3D printing, so you can adjust the size to the wheels you actually use. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 3752 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3752 model
Kategori hakkında

«3D Printing Cases for Angle Grinder Discs: STL Files»

The models fall into a few groups. There are closed cases sized around the usual wheel diameters, hinged designs where the lid is part of the same print, open racks and stands that keep several discs upright, and smaller organizers for accessories such as spanners, spare nuts or bits. The difference is mostly in how the discs are held: a lid that clips shut, a spindle through the centre hole, or slots that keep the wheels apart.

Before printing, open the author's model page and read the listed dimensions: outer diameter, disc thickness and how many wheels fit inside. Check whether the lid prints as a separate part, whether hinges need clearance, and whether supports are needed for overhangs. The material and settings the author lists are a useful starting point, and photos of real prints show how the parts fit together better than renders do.

If the first search gives little, try other wordings: disc case, wheel holder, cutting disc storage, grinder disc organizer, or workshop box insert. Related topics such as tool box inserts, bit organizers and wall-mounted holders often contain designs that can be scaled to disc dimensions. Combining a diameter and a type of holder in the query usually narrows the results fastest.

FAQ

Sıkça sorulan sorular

How do I pick a case for a specific disc diameter?
Compare the inner diameter and depth stated on the model page with the wheels you have. Many designs are drawn around one common size, so scaling is often needed for other diameters.
Do these cases print without supports?
It depends on the design. Flat-bottom boxes and print-in-place hinges usually need none, while lids with deep recesses or large overhangs may need them. The model page or the author's photos usually show this.
Which material works for a workshop disc case?
Any rigid filament works for storage; the choice matters more for hinges and thin clips, where layer direction affects how the part bends. Check what the author lists and what other builders used.
Can a disc case be mounted on a wall or bench?
Some designs include screw holes or a separate holder for that. If the model page does not mention mounting, look for a wall holder or rack in the same collection and check its fixing points.
İlgili
Alet ve ekipman

3D Models for Angle Grinder Cases and Disc Storage

93149 model
Elektronik

3D Models for Angle Grinder Disc Storage

14944 model
Alet ve ekipman

Angle Grinder 3D Models: STL Holders and Jigs

1811 model
Alet ve ekipman

STL Files for Angle Grinder Disc Storage Cases

130331 model
Alet ve ekipman

Holder STL Models for Cups, Tools and Accessories

558201 model
Alet ve ekipman

125mm Cutting Disc Case and Holder 3D Models

285771 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç