Alet ve ekipman

3D Models for Wiring Cases, Boxes and Enclosures

This collection gathers STL files for wiring cases: enclosures for control boards and power electronics, cable organizer boxes, junction boxes, and housings for smart controllers and switches. It helps when you need to route cables, protect a board, or replace a damaged box. The models vary in size, part count and mounting style. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 5510 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5510 model
Kategori hakkında

«3D Models for Wiring Cases, Boxes and Enclosures»

Enclosures for printer boards and power electronics usually have openings for connectors, fans and mounting screws, while cable organizer boxes and junction boxes focus on routing and covering wires. Cases for smart controllers and network modules tend to be compact, with cutouts for ports and antennas. Switch and remote cases often include inserts or lids that hold buttons in place.

Before printing, check the dimensions and scale against your board or cable bundle, the number of parts and how they assemble, and whether the author lists supports. Look at the material and settings the author recommends, since thin walls or large flat lids can warp. Photos of real prints help you judge clearances for connectors and cable entries.

To narrow the results, try synonyms such as enclosure, housing, junction box, cable box, or organizer, and combine them with the device type, like controller, relay, or power supply. Related topics include DIN rail mounts, wall brackets, and panel cutouts. If you need a specific fit, search by the board or module name you already use.

FAQ

Sıkça sorulan sorular

What should I measure before printing a wiring case?
Measure the board or cable bundle, the connector heights, and the space needed for screws or clips. Compare these with the dimensions in the model description and the author's photos.
Do wiring cases need supports?
It depends on the geometry: overhangs around openings and lids may need them, while flat boxes often print without. The author's page usually states whether supports are required.
Which material works for enclosures near electronics?
Many authors list PLA or PETG for general use, and ABS or ASA where higher temperature resistance is needed. Check the recommended material and settings on the model page.
How can I find a case for a specific controller?
Search with the controller or module name plus terms like case, enclosure, or housing. You can also look for parametric models that let you adjust dimensions.
İlgili
Nesneler

3D Models for Cases and Enclosures to Print

398700 model
Elektronik

Wiring Cover 3D Models and STL Files

3687 model
Ev ve yaşam

3D Models for Garage Wiring and Cable Routing

30837 model
Alet ve ekipman

Tool Case STL Files for 3D Printing

273489 model
Alet ve ekipman

3D Models for Angle Grinder Cases and Disc Storage

93149 model
Alet ve ekipman

Milling Cutter Cases: STL Models for 3D Printing

115903 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç