Elektronik

40138 Battery Holder 3D Models and STL Files

This collection gathers STL files for holders built around 40138 LiFePO4 cells, from single-cell cradles to multi-cell racks. You will also find holders for related cylindrical sizes and designs with covers or top bands. It helps you find a starting point for 3D printing battery packs, storage, or custom mounts. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2098 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2098 model
Kategori hakkında

«40138 Battery Holder 3D Models and STL Files»

Battery holders in this collection range from simple single-cell cradles to multi-cell racks that set spacing for pack assembly. Some models include covers, top bands, or mounting tabs, while others are open frames for spot welding. Holders for related cell sizes appear alongside 40138 designs, so check the cell diameter and length before choosing.

On the model page, review the listed cell dimensions, wall thickness, and whether the holder needs supports. Look at photos of real prints to judge fit and tolerances, and note the material and settings the author recommends. For battery packs, confirm how cells are retained and whether the design allows for busbar or nickel strip access.

To narrow results, try synonyms such as cell holder, battery bracket, spacer, or pack frame. Related searches include 40135, 33140, LiFePO4, and cylindrical cell holders. You can also combine terms like multi-cell, modular, or covered to find a specific layout.

FAQ

Sıkça sorulan sorular

What is a 40138 holder used for?
It holds a cylindrical LiFePO4 cell of that size in place, often as part of a battery pack or a test fixture. The holder sets spacing and keeps cells aligned during assembly.
How do I check if a holder fits my cells?
Compare the cell diameter and length listed on the model page with your actual cells. Also look at the holder's internal dimensions and any notes about tolerances.
Do these holders need supports when 3D printing?
It depends on the model's orientation and overhangs. The author's page usually states whether supports are needed and which print settings to use.
Can I use these holders for other cell sizes?
Some designs are made for related cylindrical sizes, but a holder for one size may not fit another without scaling. Check the dimensions before printing.
İlgili
Elektronik

40138 Battery Holders and Related 3D Models

190 model
Elektronik

40138 Battery Holders: 3D Models and STL Files

3025 model
Elektronik

18650 Battery Holder STL Models for 3D Printing

482740 model
Nesneler

3D Models for Card Holders: STL Files to Print

477912 model
Pratik gereçler

21700 Battery Holder STL Models for 3D Printing

487672 model
Elektronik

40138 LiFePO4 3D Models: Holders, Boxes, STL

130876 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç