Taşıtlar

BMW E30 Cold Air Intake: 3D Models and STL Files

This collection covers 3D printing files for cold air intake parts for the BMW E30 platform. You will find headlight and fog light ducts, intake tubes and adapters, gauge vent pieces, and scoops for related BMW chassis. The models help you plan a custom intake route before you send anything to a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 5220 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5220 model
Kategori hakkında

«BMW E30 Cold Air Intake: 3D Models and STL Files»

The parts in this collection differ by where they sit on the car. Headlight and fog light ducts replace or sit near the light housings, while intake tubes and adapters connect the filter or throttle body to a front opening. Gauge vent pieces are interior trim items, and scoops for other BMW chassis show how the same idea changes with the front-end layout.

When choosing a model, look at the author's page for the listed dimensions and scale, the number of parts, and whether the design needs supports. Check which material and print settings the author notes, and look for photos of real prints to judge the surface finish and how the pieces meet. Some parts are split for easier printing, while others are one piece, so the assembly steps matter.

To refine the search, try terms such as cold air intake, ram air, headlight intake, fog light duct, intake adapter, and gauge vent. You can also search by chassis code or by related BMW series if you are adapting a part from another front end. Combining a part type with the body style or the engine bay area usually narrows the results.

FAQ

Sıkça sorulan sorular

What parts make up a cold air intake for a BMW E30?
A typical setup includes a duct or scoop at the front, a tube or adapter that carries air toward the engine, and sometimes a gauge vent or trim piece. The exact mix depends on the engine bay and the front-end parts already on the car.
Can I print an intake part in plastic?
Many intake ducts and adapters are printed in plastic, but the material choice depends on heat and load near the engine bay. Check the author's notes for the material and settings they used.
How do I check whether a model matches my E30?
Look at the dimensions and scale on the model page, and compare them with the space around your headlight, fog light, or intake path. Photos of real prints and the listed part count can also help you judge how the part goes together.
What search terms help find related intake parts?
Try ram air, headlight intake, fog light duct, intake adapter, and gauge vent. Adding the chassis code or a related BMW series can bring up parts from other front-end designs.
İlgili
Taşıtlar

BMW Cold Air Intake 3D Models and STL Files

19919 model
Taşıtlar

BMW X5 Cold Air Intake: 3D Models and STL Files

183039 model
Taşıtlar

Cold Air Intake 3D Models and STL Files

316608 model
Taşıtlar

Cold Air Intake 3D Models and STL Files

8268 model
Taşıtlar

Cold Intake Adapters for VAZ: 3D Models

65578 model
Taşıtlar

Cold Air Intake STL Models for Lada and Other Cars

8540 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç