Alet ve ekipman

3D Models of 30 mm Pipe Clamps and STL Mounts

This collection gathers 3D models of clamps, clips and holders built around a 30 mm pipe or tube diameter. It covers snap-on click-lock designs, parametric clamps you adjust to your own size, and simple routing clips for hoses and conduit. All files are made for 3D printing, so the wall thickness, screw holes and opening geometry are already part of the STL. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 8314 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 8314 model
Kategori hakkında

«3D Models of 30 mm Pipe Clamps and STL Mounts»

The models differ mainly in how they grip the pipe. Click-lock clamps close around the tube and take a screw or bolt through a mounting tab, while hinged and braced versions open on a pivot and are often used on thicker or heavier runs. Parametric files let you set the diameter, wall thickness and hole size before exporting, which is useful when your pipe measures slightly off a nominal value.

When choosing a model, read the author's page for the stated inner diameter, the number of separate parts, and whether supports are needed for the overhangs. Check the material and settings the author lists, since clamps carry load and a brittle filament may crack at the tab. Photos of real prints show how the clamp closes and how much clearance the screw hole has.

You can widen the search with synonyms such as pipe clip, tube holder, conduit clamp, hose mount or Rohrschelle, and with size terms like 30 mm, 3/4 inch or DN25. Related topics include cable and hose routing, workshop storage, pool plumbing and parametric mounting systems. If a model is close but not exact, look for a parametric version and scale the diameter yourself.

FAQ

Sıkça sorulan sorular

How do I know a clamp matches a 30 mm pipe?
Check the inner diameter stated on the model page and compare it with the outer diameter of your pipe, not its nominal size. Wall thickness of the pipe and any insulation change the measurement you need.
Do these clamps need supports?
It depends on the shape: flat-backed clips often print without supports, while round clamps with a closed ring or a large overhang may need them. The author's page usually shows the orientation used.
Which material works for a pipe clamp?
Rigid filaments are common for indoor routing, and tougher blends are often chosen where the clamp flexes or carries weight. The author's listed material and settings are the starting point, then test one piece before printing a set.
Can I change the diameter of a clamp model?
Parametric models allow this directly, and simple ring clamps can sometimes be scaled in the slicer. Scaling also changes the screw hole and wall thickness, so check those after resizing.
İlgili
Alet ve ekipman

30 mm çaplı kelepçe için 3D model ve STL dosyaları

285794 model
Alet ve ekipman

3D Yazıcı İçin Hortum ve Boru Kelepçesi Modelleri

2511 model
Nesneler

100 mm'den 150 mm'ye 3D Baskı Boru Adaptörü

133136 model
Genel arama

40 mm Çaplı 3D Model ve STL Dosyaları

65538 model
Nesneler

Pool Clamp 3D Models and STL Files for 3D Printing

2739 model
Alet ve ekipman

PVC boru için 3D model ve STL dosyaları

12519 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç