Nesneler

3D printing filter housings: STL files to browse

This collection gathers filter housings modelled for 3D printing: boxes and frames that hold HEPA, activated carbon or foam media, plus fan mounts and cartridge shells. Most entries are small parts that fit around an existing fan, duct or appliance opening. Browsing them helps you find a shape close to your own build before you open an STL in a slicer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 4001 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 4001 model
Kategori hakkında

«3D printing filter housings: STL files to browse»

The largest group covers chamber exhaust housings for enclosed 3D printers, where a fan pulls air through a filter stack. A second group is generic fan housings sized for common 80 mm and 120 mm fans, often with a grille or a slot for filter media. Other entries serve appliances and equipment, such as dryer or pump housings, and some designs mount without screws using snap-on covers or clips.

When comparing models, look at the dimensions the author lists: fan size, duct opening, wall thickness and the gap left for filter media. Check how many parts the housing has and whether they are meant to be glued, screwed or clipped together, and whether the author expects supports. Read the material and slicer settings on the model page, and look at photos of finished prints to judge how the seams and mounting points come out.

To widen or narrow the results, try synonyms such as filter box, filter holder, filter bracket, fan adapter or exhaust duct. Adding a fan size, a media type or the word chamber or enclosure usually cuts the list quickly, while related topics like air ducting, carbon media holders and vent covers can turn up shapes that fit the same opening.

FAQ

Sıkça sorulan sorular

What is a filter housing model used for?
It holds filter media in place and guides air through a fan, duct or opening. On 3D printers it is usually mounted at the chamber exhaust, but similar housings appear on appliances and equipment.
How do I pick the right size?
Start from the fan or opening you already have and compare it with the dimensions on the model page. Check the space left for media and the thickness of the housing walls before slicing.
Do these housings need supports?
It depends on the geometry: overhanging ducts and round openings often do, while flat plates may not. The author usually states this, and print photos show how the part was oriented.
Can I adapt a housing to a different fan?
Yes, many designs are simple enough to rescale or edit in CAD. Changing the fan opening means adjusting the mounting holes and the duct, so check that the new dimensions still leave room for media.
İlgili
Ev ve yaşam

Air Filter Housing STL Models for 3D Printing

167093 model
Nesneler

3D Models of Gas Mask Filter Housings and STL Files

162058 model
Yazıcı parçaları

3D Models for Filters: Filament, Air and Dust STL

23294 model
Nesneler

3D Models of Bodies, Shells and Casings

626238 model
Yazıcı parçaları

Car Air Filter Housing 3D Models and STL Files

9401 model
Taşıtlar

Car Cabin Filter Housing: 3D Models and STL Files

2841 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç