Elektronik

Raspberry Pi Pico 2W Cases: 3D Models and STL Files

This collection gathers 3D models for housing Raspberry Pi Pico 2W boards and closely related single-board computers. It covers slim snap-fit shells, modular cases with space for add-ons, and mounting brackets, so you can pick a shape that matches your 3D printing setup and the way the board will be used. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 393888 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 393888 model
Kategori hakkında

«Raspberry Pi Pico 2W Cases: 3D Models and STL Files»

The models here differ mainly in how the board is held and closed. Slim shells are usually two printed halves that snap or screw together and keep the footprint close to the board itself. Modular cases add side panels, lids or internal posts so a keypad, display or wiring can sit inside. Mounts and clips are simpler parts that attach a board or a finished case to a rail, panel or frame.

Before printing, read the author's model page for the board version the case was drawn around, since port and antenna cutouts vary between revisions. Check the number of parts, how the lid closes, wall thickness and whether the model needs support material. Also look at the material and settings the author lists, and at photos of real prints, to judge how the tolerances behave on your 3D printer.

If the results feel narrow, try other words for the same object: enclosure, shell, housing, cover or bracket. Related searches include snap-fit, slim, modular, stackable, DIN rail, panel mount, keypad and display. You can also widen the board side of the query, for example toward Pico W, Zero 2W or general microcontroller project housings, and then check dimensions against your own board.

FAQ

Sıkça sorulan sorular

Will a case made for the Pico W fit the Pico 2W?
The outlines are close, but cutouts and antenna areas can differ between revisions. Check which board versions the author lists on the model page before printing.
Which material should I use for a small board enclosure?
PLA is common for indoor cases, while PETG or ABS are often chosen where heat or flexing matters. The author's page usually names a material and settings that were used.
Do these cases need support material?
Many are split into parts so they print without supports, but overhangs and orientation vary by model. Look at the recommended orientation and the preview images on the model page.
Can a Pico case be mounted on a rail or panel?
Some models include clips, flanges or brackets for rails and panels. Check the mounting dimensions and hole spacing listed by the author against your rail or panel.
İlgili
Elektronik

Raspberry Pi 3 3D Models: Cases, Mounts and Racks

1119880 model
Elektronik

Raspberry Pi 4 Case 3D Models and STL Files

240947 model
Elektronik

Raspberry Pi Pico W 3D Models: Cases and STL Projects

4261 model
Elektronik

Raspberry Pi Cases and Mounts: 3D Models and STL Files

31518 model
Elektronik

Raspberry Pi 5 3D Models and STL Cases

113034 model
Elektronik

Raspberry Pi 5 3D Models: Cases, Mounts and HATs

130281 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç