Alet ve ekipman

3D Models of Covers, Housings and Decorative Parts

This collection gathers STL files for covers and housings, character figures, planters and small decor pieces. It is useful when you are looking for a replacement cover for a 3D printer fan or a decorative part to print alongside it. The mix is wide, so the sections below help you narrow it down. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 2 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 5706 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5706 model
Kategori hakkında

«3D Models of Covers, Housings and Decorative Parts»

The files fall into a few groups. Fan covers and housings are shaped around a specific fan opening and mounting pattern, so they are usually thin shells with cutouts. Character figures and props are solid or multi-part models built for display. Planters, vases and stands sit in between: they are decorative, but their size and wall thickness matter for how they print.

When you open a model page, check the dimensions first, especially for covers, where the fan size and screw spacing decide whether the part will fit your machine. Look at the number of parts, whether the author shows an assembly, and whether supports are needed for overhangs. The material and settings listed by the author, plus photos of real prints, tell you more than the render does.

To widen or narrow the results, try related wording: fan shroud, duct, housing, bracket, or cover for a named printer model. For the decorative side, terms like planter, pot, vase, stump, stand or desk organizer lead to similar shapes. Combining a subject word with a format word, such as figure or prop, usually gives a cleaner list.

FAQ

Sıkça sorulan sorular

How do I pick a fan cover that fits my printer?
Compare the fan size, the mounting hole spacing and the overall depth on the model page with the measurements of your machine. A render alone does not show this, so read the description and any dimension drawings.
Do planters and vases need supports?
Often they do not, if the walls slope gently and the base is flat, but tall necks and sharp overhangs may need them. Check the author's notes and photos of printed results before you slice the file.
Which material should I use for a cover near a hotend?
Authors usually state the material they used, and parts close to heat are often printed in filaments with higher temperature resistance. Follow the listed settings as a starting point and adjust for your own setup.
How can I find more models in the same style?
Search for synonyms and related subjects rather than one exact phrase, for example shroud or duct instead of cover, or pot and vase instead of planter. Browsing a category page also surfaces files with similar shapes.
İlgili
CNC ve freze

Holiday-Themed 3D Models for Gifts and Decor

1978 model
Alet ve ekipman

3D Models for Corrugated Conduit Splitters and Clamps

2374 model
Alet ve ekipman

Fastex Buckle 3D Models: STL Side-Release Buckles

2026 model
Alet ve ekipman

3D Models for Angle Grinder Cases and Disc Storage

93149 model
Alet ve ekipman

Kirisun DP990 Knob 3D Models and STL Files

3105 model
Alet ve ekipman

PTZ Camera Mounts: 3D Models and STL Files

43542 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç