Elektronik

Subwoofer Mounts: 3D Models and STL Files

The collection gathers STL files for mounting subwoofers and speakers: car brackets, under-desk holders, wall mounts, adapter rings and shaker plates. Many of these are small parts that are awkward to buy on their own, so a 3D printer is a practical way to make them. Each entry links to its source, where the author's notes and files live. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 2456 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2456 model
Kategori hakkında

«Subwoofer Mounts: 3D Models and STL Files»

Car mounts are shaped around a particular floor, trunk or console, while desk and wall mounts follow the size of a speaker cabinet. Adapter rings and extensions change the diameter of an opening so a driver of another size fits a hole that already exists. Bass shaker plates are flat parts that bolt a transducer to a rig or chair frame.

On the model page, read the dimensions and the parts list first: many of these pieces come in two or more sections that are joined with screws or glue. Check whether the author notes supports, infill and material, and look at photos of printed parts to judge wall thickness and how the part meets the surface. For pieces that carry weight or sit near a vibrating driver, thicker walls and a stiffer material matter more than a decorative finish.

Search terms can be narrowed by the device, the mounting place or the driver size: under-desk, wall, trunk, ring, plate, bracket. Related queries include speaker mount, driver adapter, bass shaker plate and monitor stand bracket. If nothing matches your exact device, look for a generic ring or plate of the right diameter and adjust the holes.

FAQ

Sıkça sorulan sorular

What measurements matter when choosing a subwoofer mount?
The outer diameter of the driver or cabinet, the spacing of the mounting holes and the thickness of the surface it attaches to. Compare these with the dimensions listed on the model page before printing.
Do these models need supports?
It depends on the shape. Flat plates and rings often print without them, while brackets with overhangs may need them. The author's notes usually state what was used.
Which material works for a mount that holds a speaker?
Authors often list PLA, PETG or ABS. Parts that sit in a car or near a vibrating driver are usually printed in a tougher material with more walls.
Can a model be scaled to fit another driver size?
Scaling changes every dimension, including screw holes and wall thickness. It is often simpler to look for an adapter ring or plate with the diameter you need.
İlgili
Nesneler

3D printed subwoofer enclosures and parts: STL files

1640 model
Elektronik

STL Models for Subwoofer Grills and Speaker Covers

414837 model
Müzik

Subwoofer Enclosure 3D Models and STL Files

117371 model
Nesneler

Trapezoid Subwoofer 3D Models and STL Files

1401 model
Alet ve ekipman

5.8 GHz Antenna and Device Mounts: STL Files to Print

8265 model
Alet ve ekipman

3D Models of Fastenings and Mounts for 3D Printing

728982 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç