Elektronik

3D Models for Antenna Mounts and Brackets

This collection gathers STL files for antenna mounts and brackets used in radio, network and mobile setups. It covers parts that attach antennas to poles, cases, vehicles and small frames. The pages are useful when you need to adapt an antenna to a specific surface or enclosure. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 188485 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 188485 model
Kategori hakkında

«3D Models for Antenna Mounts and Brackets»

Pole mounts usually clamp around a mast or rail, while case-integrated designs combine an enclosure with a mount point. Receiver holders tend to be small and shaped around a connector, and vehicle or roof mounts use larger plates or curved bases. FPV drone mounts often mix antenna and GPS or video transmitter positions on one bracket.

Before printing, open the author's page and check the listed dimensions, connector type and mounting hole spacing. Look at how many parts the design uses and whether assembly needs screws, inserts or glue. The material and settings the author lists can help you match the part to outdoor or indoor use, and photos of real prints show how the finished mount sits.

To narrow the results, try synonyms such as bracket, holder, clamp, mast mount or connector mount. Related searches include receiver antenna bracket, pole bracket, roof mount and case with antenna opening. If you know the connector standard, add it to the query to filter out unrelated shapes.

FAQ

Sıkça sorulan sorular

What should I measure before printing an antenna mount?
Measure the antenna connector, the surface or pole it will attach to, and the distance between mounting holes. Compare those values with the dimensions on the model page.
Do antenna mounts always need supports?
Not always. It depends on overhangs, bridge sections and how the model is oriented on the build plate. The author's page often notes the orientation and whether supports are suggested.
Which material works for an outdoor antenna mount?
The choice depends on sun exposure, temperature changes and mechanical load. Check the material guidance on the model page and consider how the part will be fastened.
Can I adapt a mount to a different antenna?
You can scale or modify a design if the connector and hole spacing allow it. Check the original dimensions first, then adjust the model in a CAD tool before printing.
İlgili
Elektronik

3D Models for Antenna to Pipe Mounting

223109 model
Elektronik

3D Models for Antenna Mounts and Parts

27203 model
Pratik gereçler

Drone Antenna Mounts: 3D Models and STL Files

12360 model
Elektronik

3D Models for Antenna Mast Mounting and Supports

194247 model
Elektronik

3D Models for Video Receiver and Antenna Mounts

235006 model
Elektronik

3D Models of Antenna Brackets and Mounts

187698 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç