Spor ve fitness

Scooter Fender and Mudguard STL Models

This collection gathers STL files for scooter fenders, mudguards, stands and small mounts. It is useful when a stock part is missing, cracked or you want a different shape, and you plan to make it on a 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 43 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2089 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2089 model
Kategori hakkında

«Scooter Fender and Mudguard STL Models»

The models split into a few groups: rear fenders and mudguards, front guards that sit near the fork, stands, handlebar extenders, phone mounts and spoilers or trim pieces. Rear parts are usually the largest and often wrap around the wheel, while front guards are shorter and attach at the fork. Stands and mounts are mostly simple shapes with flat contact points.

When you choose a model, look at the size and scale first, then at the number of parts and how they join. Check the mounting points against your scooter and the wheel clearance the author describes. On the model page, read whether supports are needed, which material and settings the author lists, and look at photos of real prints before you slice the file.

If the results are narrow, try other words for the same part: mudguard, fender extension, wheel cover or splash guard. Related searches such as scooter stand, handlebar extender, phone holder or spoiler often lead to matching pieces. Adding the wheel size or the mounting style to the query can narrow the list further.

FAQ

Sıkça sorulan sorular

Do scooter fender models need supports?
It depends on the shape. Flat or gently curved guards often print without them, while parts with overhangs or deep recesses may need supports. The author's page usually states this.
How do I check that a fender fits my scooter?
Compare the wheel size, the distance between mounting holes and the width of the guard with your scooter. Photos of the part on a real scooter help more than a render.
Which material is used for outdoor scooter parts?
Authors often list a filament and settings on the model page. For parts exposed to sun and vibration, read those notes and consider how the layer lines run across the load.
Can I scale a fender model to fit another wheel?
Scaling changes wall thickness and mounting holes as well as the outer size. If you scale, check the hole spacing and the clearance around the wheel again before printing.
İlgili
Taşıtlar

Midway 0810 Wing 3D Models and STL Files

2377 model
Taşıtlar

Midway scooter fender STL models for 3D printing

2557 model
Taşıtlar

Scooter Fender 3D Models and STL Files

2370 model
Taşıtlar

Scooter Wing and Fender STL Models for 3D Printing

73787 model
Hobi ve kendin yap

Midway Wing 0809: 3D Models for 3D Printing

2210 model
Spor ve fitness

Scooter Mounts and Stands: 3D Models to Print

207766 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç