Alet ve ekipman

3D Models of Gantry Cranes and Winches for 3D Printing

This collection gathers 3D models of gantry cranes, winches and the parts that go with them, prepared for 3D printing. It covers large frame structures as well as small drums, trolleys and fittings, so you can compare several approaches before downloading an STL. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 16.10.2026

Koleksiyonu gör Tümünü göster: 2121 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2121 model
Kategori hakkında

«3D Models of Gantry Cranes and Winches for 3D Printing»

The range splits into a few groups. There are gantry and beam structures, winch bodies with drums or spools, scale crane models for dioramas, small winch parts for RC crawler builds, and simplified construction cranes meant as toys. They differ mainly in size, in how many separate parts they contain, and in whether the mechanism is decorative or meant to move.

When you open a model page, look at the stated scale and overall dimensions first, then at the part count and how the parts join. Check whether the author lists a specific material and layer height, and whether supports are needed for overhangs such as hooks, drums or frame legs. Photos of actual prints show more about proportions and wall thickness than a render does.

If a search returns little, try the words used for the same hardware: hoist, trolley, spool, cable drum, pulley block or fairlead. Related topics also help, for example model railway accessories, RC crawler bodies, or construction toys, since winch and crane parts often sit inside those collections rather than under their own term.

FAQ

Sıkça sorulan sorular

How is a gantry crane model different from a beam trolley model?
A gantry crane model usually includes the full frame with legs and a bridge beam, while a trolley model is only the moving block that rides along a beam. Some authors publish them as separate files so you can combine them at the scale you need.
What scale should I choose for a crane or winch model?
It depends on what it has to fit next to. Model railway and diorama builders usually work from a stated ratio, while RC builders match the part to their vehicle's dimensions. The model page normally lists the scale and the measured size in millimetres.
How can I tell whether a printed winch can be motorized?
Check the description for a shaft opening, bearing seats or a mounting pattern for a motor, and for the internal dimensions of the drum. If the author only shows a static assembly, treat it as a display part unless the page states otherwise.
Which details matter most on small winch parts?
Wall thickness and hole diameters matter most, because thin flanges and narrow fairlead slots can break during use. The author's notes on layer orientation and material usually explain how the part was meant to be printed.
İlgili
Alet ve ekipman

3D vinç modelleri ve STL dosyaları

6437 model
Oyuncaklar ve figürler

Lego Technic kiriş 3D model ve STL dosyaları

9915 model
Alet ve ekipman

1 inç bilyalı vana 3D model ve STL dosyaları

11612 model
Alet ve ekipman

Bilyalı Vana İçin 3D Model ve STL Dosyaları

12508 model
Alet ve ekipman

Endüstriyel Vinç 3D Model ve STL Dosyaları

1414 model
Alet ve ekipman

Kule vinç 3D model ve STL dosyaları

24012 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç