Taşıtlar

Live Axle Diff Lock STL Models for RC Builds

This collection covers STL parts for live axles, differential locks, pinion drives and rear-axle assemblies used in RC and printable vehicles. It helps you compare how different designs handle locking, gear layout and axle width before you send files to a 3D printer. Some entries are complete axle housings, while others are small add-on locks or replacement gears. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2171 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2171 model
Kategori hakkında

«Live Axle Diff Lock STL Models for RC Builds»

The results mix complete live-axle assemblies with separate diff-lock parts, pinion and bevel gear sets, rear-axle housings, and dual-pinion or dual-wheel axle components. Some are aimed at scale trucks and tractors, while others are add-on locks or replacement gears for existing chassis. Differences often come down to how the lock is engaged, the gear ratio, the shaft diameter, and whether the axle is driven on one side or both.

Before choosing a file, check the stated scale, axle width, shaft diameter, gear ratio, and number of parts. Look at the author's notes for material, layer height, infill, and whether supports are needed, then compare those details with photos of real prints. Assembly can involve bearings, pins, screws, or glue, so confirm the listed hardware against what you have.

To narrow the search, try related terms such as locked diff, spool, rear axle, pinion gear, bevel gear, axle housing, and RC scale truck. Combining a vehicle type with a part name, like crawler axle or tractor rear axle, can separate complete assemblies from small replacement pieces. You can also search by drivetrain layout, for example dual pinion or independent suspension, if that matches the build you are planning.

FAQ

Sıkça sorulan sorular

What does a diff lock do in a live axle?
A diff lock stops the two axle outputs from turning at different speeds, so both wheels receive drive together. In RC models it is often a small insert, a replacement gear, or a locked spool inside the axle.
Which details matter when choosing a live axle STL?
Look at scale, track width, shaft diameter, gear ratio, and the number of parts. Also check whether the design uses bearings, pins, screws, or glue during assembly.
What should be checked before printing an axle or diff lock?
Review the author's material, layer height, infill, and support notes. Photos of real prints can show how the parts go together and where clearances matter.
How can I find more models like a live axle diff lock?
Try search terms such as locked diff, spool, rear axle, pinion gear, bevel gear, and axle housing. Adding a vehicle type, like crawler or scale truck, can narrow the results.
İlgili
Taşıtlar

Hood Lock 3D Models and STL Files

11704 model
Ev ve yaşam

3D Models with Locks: Clips, Boxes, Latches

136033 model
Taşıtlar

Seat Belt Plug 3D Models and STL Files

2513 model
Taşıtlar

F1 araba 3D model ve STL dosyaları

481861 model
Taşıtlar

Sliding Boat Table 3D Models and STL

3681 model
Taşıtlar

EUC Pads, Pug and Puddle 3D Models

828 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç