Müzik

LP Clamp 3D models: Vinyl, Tonearm and Mic Arm Parts

This collection covers STL files for LP clamps and adjacent parts: tonearm and stabiliser clamps, microphone arm mounts, record holders and display pieces. It helps you find printable parts for turntables, storage and small equipment mounts. Compare the listed dimensions and assembly notes before you start a 3D printing job. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 32 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 1543 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1543 model
Kategori hakkında

«LP Clamp 3D models: Vinyl, Tonearm and Mic Arm Parts»

Turntable-related models include tonearm rests, stabiliser clamps and power-cord clips, while storage pieces cover record holders, sleeve displays and wall mounts. Microphone arm parts tend to use joint sleeves, adapters and threaded inserts, and equipment clamps often fit docking stations, sensors or lamp fixtures. These groups differ in how they attach: some grip a tube or arm, others sit on a shelf or wall, and some replace a small original part.

When choosing a model, check the stated dimensions, the number of parts and whether the design expects supports. Look at the material and settings the author lists, and review photos of real prints to judge how the clamp meets the surface. For moving or load-bearing parts, consider layer orientation and wall thickness, since a clamp can fail at the hinge or thread.

To refine a search, try synonyms such as record clamp, vinyl stabiliser, tonearm rest, mic arm adapter, cable clip or holder. Related topics include turntable accessories, record storage, microphone mounting and small equipment brackets. Adding the printer type, material or mounting style can narrow results when the search tool offers those filters.

FAQ

Sıkça sorulan sorular

What is an LP clamp used for?
In vinyl setups, an LP clamp or stabiliser presses a record onto the platter or holds a tonearm rest. In microphone arms, LP often refers to a low-profile arm, where clamps join sections or mount accessories. Check the model page for the exact purpose.
Which measurements matter for a printed clamp?
The inner diameter, wall thickness, thread size and the gap the clamp must close are key. Compare them with the part you want to attach before printing.
Do these models need supports?
It depends on the shape: overhangs, threads and hollow rings may need supports, while flat brackets often print without them. The author's notes and photos usually show the intended orientation.
Can an LP clamp be scaled?
Scaling changes threads and clearances, so adjust only if the author provides a parametric file or notes. Otherwise, look for a version with the dimensions you need.
İlgili
Alet ve ekipman

3D Printable Clamps: STL Models for Shop and Desk

172350 model
Alet ve ekipman

Clamp Mount 3D Models: STL Files for Desks and Pipes

13351 model
Alet ve ekipman

Pipe Clamp 3D Models: STL Files for Tubes and Conduit

84869 model
Alet ve ekipman

Hose Clamp 3D Models: STL Files for Printing

8872 model
Alet ve ekipman

Metal Clamp 3D Models: STL Files for Printing

3800 model
Alet ve ekipman

3-Way Clamp STL Models for Corners and Frames

12257 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç