Elektronik

ELRS Antenna Mounts for Mark 4 V2: STL Files

This collection gathers STL mounts for ELRS receivers, GPS units, cameras and video transmitters on Mark 4 V2 FPV frames. It also includes TPU kits and replacement parts for rebuilding or adjusting a frame. The files are intended for 3D printing in TPU or similar materials. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 5721 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5721 model
Kategori hakkında

«ELRS Antenna Mounts for Mark 4 V2: STL Files»

ELRS receiver mounts often hold a small antenna or receiver board, while GPS mounts position a module away from power wiring. Camera mounts may be designed for an action camera or a specific camera module, and VTX mounts place an antenna at the rear of the frame. Full TPU kits combine several of these parts, and side plates or replacement mounts address frame repairs and layout changes.

Before printing, check the dimensions and mounting pattern on the author's model page, since hole spacing and standoff height vary between frame versions. Look at the number of parts, whether supports are needed, and the material and settings the author lists. Photos of real prints can show how a mount sits around a receiver, GPS module or antenna connector.

To refine the search, try terms such as FPV antenna mount, receiver holder, GPS bracket, camera mount, TPU kit or frame side plates. Related topics include action-camera mounts, video transmitter mounts and replacement parts for larger FPV frames. Combining the frame name with the part type usually narrows the results more than a single broad term.

FAQ

Sıkça sorulan sorular

What is an ELRS antenna mount used for on an FPV drone?
It holds the ELRS receiver antenna in a fixed position so the antenna is not loose or close to conductive parts. The mount shape depends on the receiver model and the frame layout.
How do I choose a GPS mount for a Mark 4 V2 frame?
Check the GPS module dimensions, hole spacing and cable exit direction on the author's page. The mount should keep the module away from power wires and video transmitters.
Can these mounts be printed in TPU?
Many FPV mounts are printed in TPU because it can flex and absorb vibration. The author's page usually lists the material and settings used for the part.
What should I check before printing a camera or VTX mount?
Review the number of parts, screw sizes, and whether the design needs supports. Photos of real prints help confirm the shape and mounting points.
İlgili
Elektronik

3D Printing Mounts for Mark 4 V2 FPV Frames

5154 model
Alet ve ekipman

ELRS Antenna and GPS Mounts: 3D Models and STL Files

507472 model
Alet ve ekipman

3D Printing Mounts for FPV Drone Frames

1378200 model
Pratik gereçler

Mark 4 V2 7 3D Models: Mounts, Helmets, Covers

612886 model
Pratik gereçler

Mark 4 V2 3D Models: Mounts, FPV Parts and Helmets

10592 model
Elektronik

ELRS and DIN Rail Mounts: 3D Models to Print

484548 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç