Elektronik

MR-60 Connector Mounts: 3D Models and STL Files

This collection gathers STL files for MR-60 connector hardware, including mounts, covers and brackets. You can use them to organize power connections on a 3D printer, RC model or custom enclosure. The range also includes adapters and covers that simplify cable routing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 13956 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 13956 model
Kategori hakkında

«MR-60 Connector Mounts: 3D Models and STL Files»

The models split mainly by where the connector sits: inline housings and caps, panel-mount plates, and wall brackets. Some parts hold a single plug, while others pair male and female sides or add a cover for cable exits. Mounts for related connector sizes appear alongside MR-60 parts, so check the stated connector series before choosing.

When choosing, open the author's model page and check the dimensions, number of parts, and whether supports are needed. Look at the material and print settings the author lists, plus photos of real prints, because connector fit depends on small tolerances. If the part is a bracket, confirm the screw holes and cable clearance for your setup.

To refine the search, try terms such as connector mount, panel mount, plug cover, strain relief, wall bracket, and holder. Related searches include Amass power connectors, 3-pin housings, and cable organizers. Combining the connector code with the mounting type usually narrows the results faster than the code alone.

FAQ

Sıkça sorulan sorular

What is an MR-60 connector used for?
It is a three-pin power connector often used for battery and motor connections in RC and DIY electronics. The models in this collection are mostly mounts, covers, and brackets for that connector.
How do I choose the right mount for an MR-60 connector?
Check the connector series, pin count, and whether the model is for a male plug, female socket, or both. Also compare the panel thickness and screw hole spacing on the author's page.
Can I print these parts in different materials?
The author's page may list a recommended material and settings. For parts near heat or stress, compare those notes with the material you plan to use.
What should I check before printing a wall bracket?
Look at the dimensions, mounting holes, and cable clearance shown in the model. Photos of real prints can help you judge how the bracket fits the device or connector.
İlgili
Oyuncaklar ve figürler

Baikal MR-60 3D Models and STL Parts

14072 model
Genel arama

Baikal MR 3D Models: Mounts, Guides and Toys

2805 model
Minyatürler ve savaş oyunları

Rieju MR and MRT 3D Models: Parts and Covers

845 model
Alet ve ekipman

MP-60 3D Models: Airgun, Aquarium and Replica STL Files

1950 model
Fandom

Fallout T-60 Power Armor 3D Models and STL Files

3546 model
Minyatürler ve savaş oyunları

Nebuchadnezzar 1:60 3D Models and STL Files

2114 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç