Elektronik

Cooler Cover STL Files for 3D Printing

This collection gathers STL files for cooler covers ranging from CPU shrouds and fan grills to beverage can sleeves and vehicle oil cooler shrouds, giving you practical parts for 3D printing. Use the filters to narrow results by size or hardware type. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 09.10.2026

Koleksiyonu gör Tümünü göster: 143776 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 143776 model
Kategori hakkında

«Cooler Cover STL Files for 3D Printing»

You will find several distinct groups here. CPU cooler covers and decorative grills fit specific socket coolers and tower heatsinks. Oil cooler shrouds for motorcycles and cars mount externally and must tolerate engine-bay temperatures. Beverage sleeves and can coolers are smaller consumer accessories, while fan guards and slot covers help with cable management and airflow inside PC cases.

Before downloading, check the author's page for size and scale, because a cover meant for one fan size will not fit a larger duct. Look at the number of parts and whether assembly is needed, and note if the author lists material or support settings. Photos of real prints help you judge surface finish and fit before you start the build.

If the first results do not match your hardware, try synonyms such as shroud, grill, sleeve, or duct. Searching for your exact cooler model or measurements will usually remove unrelated designs. You can also browse related topics like fan mounts or case mods to find complementary parts.

FAQ

Sıkça sorulan sorular

What is the difference between a cooler cover and a fan duct?
A cooler cover is usually a decorative or protective shell that sits over an existing heatsink, while a fan duct directs airflow across components. Ducts often include channels or flanges, whereas covers are flat or shaped plates.
Can I resize a CPU cooler cover to fit my heatsink?
Scaling an STL file in your slicer changes every dimension, so mounting holes and clip clearances may no longer align. It is safer to search for a design made for your exact cooler model or fan size.
What material should I use for an oil cooler shroud?
Check the author's page for the material and settings they list. Engine-bay covers often call for filaments that tolerate higher temperatures, but each design specifies its own requirements.
Do can coolers need a sealed interior?
Most beverage sleeves are open-top rings or shells that grip the can by friction. Verify the inner diameter and wall thickness on the author's page, as dimensions vary between designs.
İlgili
Nesneler

3D Models for Cooler Stands and Fan Holders

3443 model
Ev ve yaşam

Water Cooler 3D Models and STL Parts

3667 model
Yazıcı parçaları

Adventurer 5 Cooler Mods: 3D Models and STL Parts

3209 model
Elektronik

3D Models for Cooler Splitter Brackets

2990 model
Elektronik

3D Printing Brackets for Hub and Cooler Mounts

3353 model
Taşıtlar

Headlight Covers: 3D Models and STL Files to Print

3130 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç