Alet ve ekipman

3D Models of Tips, Caps and End Pieces for STL Printing

This collection gathers STL files for small end pieces: mop handle caps, steering rod boots, multimeter probe tips, and similar replacement parts. It helps when a small plastic tip breaks and a full replacement is hard to find. Check each model page for dimensions and mounting details before printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 173754 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 173754 model
Kategori hakkında

«3D Models of Tips, Caps and End Pieces for STL Printing»

The models fall into a few practical groups. Handle and rod end pieces include caps and boots that slide over tubes or steering components. Probe and measurement accessories cover parts that fit test leads or measuring tools. Small replacement tips, pins and caps appear for dispensers, straps and similar hardware.

When choosing a model, start with the fit: inner diameter, outer diameter, length, and how the part stays in place. Check whether the author lists a material and print settings, and look at photos of real prints. Flexible parts often call for TPU, while rigid covers may use PETG, ABS, or PLA. Orientation and the need for supports can change the surface where the part meets the rod.

To refine the search, try synonyms such as end cap, tip, nozzle, boot, cover, plug, ferrule, or pin. Combine them with the object they attach to, like mop handle, probe, rod end, or dispenser. Related topics include replacement parts, adapters, and protective covers. If a model is close but not exact, scaling or editing the STL may help.

FAQ

Sıkça sorulan sorular

What kinds of tip and cap models are in this collection?
The collection includes handle and rod end pieces, probe and measurement accessories, and small replacement tips, pins and caps. They cover household, automotive, and test equipment uses.
How do I find the right size for a replacement tip?
Measure the outer diameter of the rod or the inner diameter of the original part. Compare those dimensions with the model page and check the author's notes.
Which material works for flexible end caps?
Flexible caps often use TPU, while rigid covers may use PETG, ABS, or PLA. The author's page usually lists the material and settings they used.
Can I adapt a model if the dimensions are close?
You can scale or edit the STL in a slicer or CAD program. Check wall thickness and fit after scaling.
İlgili
Alet ve ekipman

Profile Pipe 3D Models: Caps, Guides and Jigs

20797 model
Alet ve ekipman

Karcher Retainer and Clip 3D Models in STL

2466 model
Alet ve ekipman

Cyclone Dust Separator STL Models for 3D Printing

13283 model
Alet ve ekipman

3D Models for Filament Containers and Dry Boxes

124947 model
Alet ve ekipman

Wide M6 Washers: 3D Models and STL Sets

6800 model
Alet ve ekipman

3D Models for Air Ducts and Gas Fume Exhaust

7900 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç