Ev ve yaşam

3D Models for Wall Mounts and Holders to Print

This collection gathers STL files for wall mounting: hooks, brackets, plates and modular holders that keep tools, devices and gear off the desk. Most of them are small enough for a single 3D printing session on a common 3D printer. It helps when you need a defined place for something that otherwise lies around. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 708221 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 708221 model
Kategori hakkında

«3D Models for Wall Mounts and Holders to Print»

The models fall into a few groups. Simple hooks and single brackets fix directly to the wall with screws and hold one item. Plates and modular systems use a grid or rail, so several holders can share the same base and be rearranged later. Pegboard-oriented designs replace the wall itself with a panel, while device brackets are shaped around a specific box or console.

Before printing, read the author's page rather than judging by the preview image. Check the outer dimensions and the hole spacing, the number of separate parts and how they join, and whether the overhangs need supports. Authors often state the material and layer settings they used; photos of real prints show how the part meets the wall and how thick the load-bearing sections are.

To widen the search, try synonyms such as wall bracket, wall holder, hook, mounting plate, pegboard mount, rail or cleat. Related topics lead to tool organizers, cable clips, shelf brackets and desk holders that use the same fixing ideas. Combining a generic term with the item you want to store usually narrows the results faster than a single broad phrase.

FAQ

Sıkça sorulan sorular

How do I choose between a hook and a bracket?
A hook holds a hanging item by a loop, handle or cord, while a bracket supports a flat or box-shaped object from below. Look at how your item rests and pick the shape that matches that contact.
Do wall mounts need supports when printing?
It depends on the geometry. Parts printed flat against the wall side often need none, while hooks with a deep overhang may. The author's page usually says what the model was sliced with.
Which material is used for these parts?
Authors commonly list PLA or PETG, and sometimes mention a higher-infill setting for load-bearing sections. Check the model page for the material and settings the author describes.
How can I find a mount for a specific device or tool?
Search for the item name together with words like wall mount, bracket or holder. If nothing matches, a universal plate or a modular grid system can be adapted with a small custom holder.
İlgili
Ev ve yaşam

Helmet Wall Mount 3D Models and STL Files

3600 model
Ev ve yaşam

Headphone Wall Mount 3D Models and STL Files

2428 model
Ev ve yaşam

Wall Stands and Wall Mounts: 3D Models in STL

12473 model
Ev ve yaşam

Wall Organizer 3D Models and STL Files

12832 model
Ev ve yaşam

Wall Planter STL Models for 3D Printing

479937 model
Ev ve yaşam

Wall Shelf and Bracket 3D Models

499088 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç