Ofis ve çalışma masası

3D Models for Monitor Organizers and Desk Risers

This collection gathers 3D models that use the space under and around a monitor: risers, trays, stackable shelves and small drawer units. Most are made for a desktop 3D printer and print as several parts that clip or screw together. It helps if you want the screen raised a little while the area beneath it does some work. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 8 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 208743 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 208743 model
Kategori hakkında

«3D Models for Monitor Organizers and Desk Risers»

The range splits into a few practical groups. Risers and stands lift the screen and often hide a drawer or a shelf inside the base. Trays sit flat under the stand and hold glasses, pens, cards or cables. Modular systems add stackable shelves and screw-on add-ons, while clip-on pieces attach to the monitor arm or the edge of the desk.

Before printing, measure the monitor base or arm footprint, the height you want the screen at, and the clearance the drawer needs to open. On the model page, look at the part count, whether the author used supports, the wall thickness, and the material and layer height they list. Photos of real prints show how the joints and the top surface come out.

If the results feel narrow, try other wording: desk organizer, monitor riser, under-monitor shelf, cable management tray, modular desk shelf, VESA shelf, print-in-place drawer. Related searches such as headphone stand, pen holder or desk cable clip often turn up pieces that combine with the same setup.

FAQ

Sıkça sorulan sorular

What measurements matter most for a monitor organizer?
The footprint of the monitor base or arm, the height you want the screen at, and the space the drawers or shelves need to open. Check these against the dimensions the author lists before printing.
Do these models need supports?
It depends on the geometry. Overhangs under shelves and inside drawer channels often need them, while print-in-place designs are laid out to avoid them. The author's notes usually say which approach the model uses.
Which material works for a part that carries a monitor?
Many authors print risers in PLA or PETG and list the settings they used. A part under load benefits from more walls and infill, so read the recommended values on the model page rather than assuming defaults.
Can I adapt a design to a different screen size?
Some files are parametric or come in several widths, others are fixed. If the model page does not mention scaling, check the comments and the part dimensions to see whether resizing would affect the joints.
İlgili
Ofis ve çalışma masası

Monitöre takılan 3D modeller ve tutucular

51539 model
Ofis ve çalışma masası

3D Monitör Standı Modelleri

497189 model
Ofis ve çalışma masası

3D Monitör Kolu ve VESA Adaptör STL Modelleri

253268 model
Ofis ve çalışma masası

Monitör çerçevesi 3D model ve STL dosyaları

58242 model
Ofis ve çalışma masası

3D Yazıcı İçin Monitör Kolu ve Braketi Modelleri

233826 model
Nesneler

3D Monitör Tutucu ve VESA Askı Modelleri

538541 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç