Pratik gereçler

3D Models for Speaker Bases with Rain Covers

This collection gathers STL files for speaker bases, stands, mounts and rain covers. You can use them to plan a 3D printing project around a speaker that stays outside. The models vary from simple plates to multi-part housings, so the collection helps you compare approaches before you slice a file. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 40 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 1329 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1329 model
Kategori hakkında

«3D Models for Speaker Bases with Rain Covers»

Speaker stands and bases usually focus on a stable footprint and a flat top surface. Rain covers and protective housings add an overhang, drainage channels or a shield over the driver. Wall and car mounts use brackets and clips, while cases and boxes enclose the speaker or its electronics. The differences show up in part count, mounting method and how much of the speaker remains exposed.

When choosing a model, check the listed dimensions and scale against your speaker, the number of parts and assembly steps, and whether the author calls for supports. Look at the material and settings the author lists, and study photos of real prints to see how the base, cover and fasteners fit together. For rain protection, pay attention to drainage, gaps and how the cover attaches, because a tight shell without an exit path can trap water.

To refine the search, try synonyms such as speaker mount, speaker bracket, outdoor speaker enclosure, rain shield or weather cover. Related topics include speaker stands, wall mounts, car mounts, electronics cases and small outdoor device housings. Combining a speaker term with a protection term usually narrows the results faster than a single broad phrase.

FAQ

Sıkça sorulan sorular

How do I match a speaker base to my driver size?
Compare the inner opening and mounting hole spacing on the model page with the measurements of your speaker. The outer dimensions and the height of the base also matter if the speaker sits in a frame or under a cover.
What should I check in a rain cover model?
Look for an overhang above the driver, a path for water to drain away, and a mounting method that keeps the cover in place. The author's photos can show how the cover sits around cables and connectors.
Do these models need supports?
Some do, especially covers with overhangs or hollow sections. The model page usually states whether supports are needed and which orientation the author used.
Can I adapt a speaker stand for a different mounting surface?
Many stands are built around a flat base or a bracket, so you can scale or modify the mounting plate in your slicer. Check the wall thickness and screw holes before changing the geometry.
İlgili
Elektronik

6,5 inç hoparlör tabanı ve yağmur koruması 3D model

2041 model
Ev ve yaşam

18 cm 3D hoparlör standı ve yağmur koruması

1270 model
Müzik

3D Baskı İçin Hoparlör Koruyucu STL Modelleri

1906 model
Nesneler

12 inç hoparlör ızgarası STL modelleri

477507 model
Nesneler

12 inç hoparlör ızgarası STL dosyası

3000 model
Genel arama

3D model kaide ve taban koleksiyonu

25506 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç