Elektronik

PCB Case 42x42: 3D Models for Board Enclosures

This collection gathers 3D models for small board enclosures: parametric boxes, snap-fit housings and cases with cooling openings. Most are made for 3D printing on a desktop 3D printer and shared as STL or editable source files. It helps when you need a housing around a board of roughly 42x42 mm and want to compare several approaches before printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 41 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 7983 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 7983 model
Kategori hakkında

«PCB Case 42x42: 3D Models for Board Enclosures»

The models differ mainly in how the lid closes and how the board is held. Some are fully parametric, so you set the outer size, wall thickness and port cutouts in the source file; others are fixed shapes with screw bosses, snap-fit clips or a sliding cover. Cooling-oriented designs add vents, fan mounts or open sides, while plain project boxes keep the board fully enclosed.

Before printing, read the author's page for the internal dimensions, the number of parts and whether supports are needed. Check the board outline, mounting hole spacing, connector heights and cable exits against your own board, since a 42x42 footprint can still differ in hole positions. Also look at the material and layer settings the author lists, and at photos of real prints, because thin walls and snap-fit clips behave differently in PLA and PETG.

If the first results are too narrow, try related terms such as enclosure, housing, project box, dev board case or DIN-rail mount. Searching by board name, connector type or the size in millimetres usually narrows the list faster than a generic phrase. You can also look for parametric generators, which you adapt to your own dimensions instead of matching a fixed model.

FAQ

Sıkça sorulan sorular

What does 42x42 refer to in these models?
It usually describes the board footprint the case was designed around, in millimetres. The outer case is larger, so check the stated internal size rather than the title alone.
How do I check that a case fits my board?
Compare the board outline, mounting hole spacing and connector positions with the dimensions on the author's page. Port cutouts and USB or power connectors are the parts that most often need adjustment.
Do these enclosures need supports?
It depends on the design: many are printed in two flat parts without supports, while cases with overhangs or recessed ports may need them. The author's page usually states this.
Can I change the size or cutouts?
Parametric models include editable source files where you set dimensions, wall thickness and openings. Fixed models can still be modified in a mesh editor, but that takes more work.
İlgili
Elektronik

PCB Case 3D Models and STL Enclosures

121702 model
Elektronik

18650 Case and Holder STL Files for 3D Printing

119086 model
Elektronik

FNIRSI Case and Enclosure 3D Models for STL Printing

96084 model
Elektronik

3D Printed GPS Cases: STL Files for Trackers

102351 model
Elektronik

Starlink Case and Mount 3D Models to Print

4165 model
Elektronik

Big Case 3D Models: Large STL Enclosures to Print

14691 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç