Alet ve ekipman

Adapter 3D Models for Computer Power Supplies

This collection gathers 3D models that adapt, mount or break out a computer power supply for other uses. It covers form-factor adapters, bench breakout parts, low-voltage taps and cooling pieces, so a 3D printer can cover several jobs from one supply. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 11415 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 11415 model
Kategori hakkında

«Adapter 3D Models for Computer Power Supplies»

The models fall into a few groups. Form-factor adapters change how an ATX, SFX or 1U unit sits and where its connectors point. Breakout boards and enclosures turn the internal rails into accessible terminals for bench work. Smaller taps take 5V out to USB or Dupont headers for microcontroller boards, while mounts, relocation plates and fan shrouds deal with fitting and airflow inside a case.

Before printing, read the author's page for the supply size it was drawn around, screw hole spacing and overall dimensions. Check how many parts the assembly needs, whether supports are required, and which material and settings the author lists. Photos of real prints help you judge wall thickness on brackets that carry weight and clearance around warm areas of the supply.

To narrow the results, try synonyms such as PSU, power supply unit, breakout, bench supply or 5V rail instead of adapter alone. Related searches work too: enclosure, stand, mount, cable, connector, Dupont, Arduino or Raspberry Pi. Combining a form factor with a use, for example ATX with bench, usually returns a shorter and more relevant list.

FAQ

Sıkça sorulan sorular

What is the difference between an ATX and an SFX adapter model?
It depends on which supply you have and which layout you need. An adapter can change the mounting pattern, move the connectors to a different side, or let a smaller unit sit in a bay meant for a larger one.
Do these models need supports when printed?
Some do, especially overhangs on brackets and enclosures. The author's page usually states whether supports are needed and which orientation was intended.
Which material works for parts near a power supply?
Authors often list a material and settings for their model. Look at those notes and at photos of real prints, since parts close to warm components and load-bearing brackets have different demands.
How do I find a model for a supply size that is not listed?
Search by the form factor and the use together, then check dimensions on each model page against your unit. Related terms such as PSU, breakout or bench supply can surface results that a single word misses.
İlgili
Alet ve ekipman

HDD and SSD Adapter 3D Models for PC Bays

89751 model
Elektronik

3D Models of Computers and PC Accessories

57949 model
Alet ve ekipman

3D Models for 2 to 1/2 Adapters and Reducers

16587 model
Alet ve ekipman

3/4 inç adaptör 3D model ve STL dosyaları

1612140 model
Pratik gereçler

Kugoo elektrikli scooter bordo bilgisayarı 3D model

16316 model
Yazıcı parçaları

3D yazıcı için adaptör modelleri

26286 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç