Alet ve ekipman

Pump Adapter STL Models for 3D Printing

This collection gathers STL models of pump adapters: connectors that join a pump to a valve, hose or port. It covers inflatable boards, air mattresses, tires, aquariums and garden lines, so you can compare shapes before printing. Each entry leads to the model page, where dimensions and print settings are listed. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 93736 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 93736 model
Kategori hakkında

«Pump Adapter STL Models for 3D Printing»

The models split by what moves through them and by the connector on each end. Air-side parts often use a tapered nozzle that presses into a valve opening, while water-side parts are threaded or slip over a hose. Some are single pieces, others are modular sets with interchangeable rings, and the same shape appears in several diameters because valves differ between boards, mattresses and small pumps.

When choosing, read the model page first: the inner and outer diameter of both ends, the number of parts, whether it is one piece or an assembly, and whether supports are needed. Note the material and settings the author lists, since a thin wall in a stiff filament behaves differently from a soft one when pushed onto a valve. Photos of real prints show how threads and tapers came out.

To narrow the search, try the words people use for the same object: connector, coupler, reducer, nozzle, valve adapter, hose adapter. Add the context, such as paddle board, air mattress, aquarium, drip irrigation or fountain. Related topics include pneumatic fittings, garden hose threads and vacuum bag ports.

FAQ

Sıkça sorulan sorular

What should I measure before printing a pump adapter?
Measure the opening or thread on the pump side and on the receiving side, and note the wall thickness you want. If a thread is involved, its pitch matters as much as its diameter.
Why do these adapters come in so many diameters?
Valve openings and hose ends are not standardized across inflatables, pumps and garden fittings. Authors often publish one shape in a few sizes so you can pick the one that matches your parts.
Do printed pump adapters need supports?
It depends on the orientation and on how steep the overhangs are. Check the notes on the model page and look at the photos to see how the part was placed on the bed.
Which material is used for these parts?
Authors usually state the filament they printed with and the layer height. Rigid filaments hold threads well, while softer ones can seal better on tapered nozzles, so the choice follows the load on the part.
İlgili
Alet ve ekipman

3/4 to Hose and Thread Adapter STL Models

1612140 model
Alet ve ekipman

3D Models for 2 to 1/2 Adapters and Reducers

16587 model
Nesneler

3D Models for Pumps and Pump Accessories

10760 model
Yazıcı parçaları

3D Printed Adapters: STL Models for Spools and Batteries

26286 model
Alet ve ekipman

Pump Adapter 3D Models and STL Files

91578 model
Alet ve ekipman

Pump Gear 3D Models: STL Gear Pumps and Drives

2580 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç