Ev ve yaşam

Plastic Door 3D Models: Handles, Hinges, Latches

This collection gathers STL files for parts that sit on or inside plastic doors: handles, hinges, latches, stoppers and small cabinet organizers. It is useful when a broken fitting on a door or drawer needs a replacement that a 3D printer can produce. Most entries are small functional pieces rather than full door panels. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 3961 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 3961 model
Kategori hakkında

«Plastic Door 3D Models: Handles, Hinges, Latches»

The parts differ in how they carry load. Handles and rosettes are mostly surface pieces fixed with screws or glue, while hinges and latches include moving elements and need clearance between the parts. Pantry and cabinet shelves add a storage function and often clip onto an existing door, so their thickness matters more than their shape.

Before printing, read the author's page for the dimensions and scale, the number of separate parts, and whether supports are needed. Check which material and settings the author lists, since thin clips and hinge pins behave differently in rigid and flexible filaments. Photos of real prints help you judge wall thickness and how the piece fits the original door.

To widen the search, try synonyms such as latch, catch, bolt, striker, bracket or knob instead of handle, and add the surface where the part is used, for example cabinet, pantry, caravan or car interior. Related topics include drawer slides, window locks and drainage covers, which share the same fitting logic. Combining a part name with a size or a hinge type usually narrows the results faster than a single broad word.

FAQ

Sıkça sorulan sorular

What do I need to measure before printing a door part?
Measure the mounting hole spacing, the thickness of the door or panel, and the clearance around any moving part. Compare these with the dimensions the author lists on the model page.
Which filament works for small hinges and latches?
Rigid filaments hold shape well for pins and catches, while flexible ones tolerate bending in clips. The author's page often names the material and settings used for the shown print.
Do these parts need supports?
It depends on the geometry: flat plates and covers usually print without them, while overhanging hooks and latch arms may need them. Check the orientation suggested in the files.
Can a printed part replace an original fitting?
Only if the dimensions match the original closely. Printing a test piece first and adjusting the scale is a common way to check the fit before a final print.
İlgili
Ev ve yaşam

3D Models of Doors and Door Accessories for STL Printing

109136 model
Ev ve yaşam

Door Stand 3D Models and STL Files

3233 model
Ev ve yaşam

Plastic Window 3D Models and STL Files

4482 model
Ev ve yaşam

3D Models for Plastic Window Parts and Fittings

38977 model
Ev ve yaşam

Door Cover STL Files: 3D Models for Printers and Devices

153602 model
Ev ve yaşam

3D Models of Door Latches and Locks for 3D Printing

7731 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç