Ev ve yaşam

Support Plates and Mounting Brackets: 3D Models

This collection gathers STL files for support plates, mounting brackets and adapters. It covers wall and shelf fixtures, vehicle mounts and printer-side holders. Use it to compare how different designs handle holes, angles and reinforcement. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 40 model 2 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 11436 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 11436 model
Kategori hakkında

«Support Plates and Mounting Brackets: 3D Models»

Common groups include flat mounting plates, L-shaped shelf brackets, wall plates for chargers and small devices, and pole or VESA adapters. Some are simple plates with pre-set holes, while others add ribs, gussets or adjustable arms. Vehicle and handlebar mounts usually include clamps or curved contact surfaces, and printer-related brackets often fit specific frame or motor layouts.

When choosing a model, check the hole pattern, plate thickness, overall dimensions and the angle between faces. Look at the author's photos of real prints and the listed material and settings. Decide whether the part will be loaded in tension, shear or bending, and whether supports are needed for overhangs.

To narrow results, try synonyms such as wall mount, bracket, support plate, adapter, base plate or holder. Related searches include shelf bracket, VESA adapter, pole clamp, device mount and printer frame bracket. Adding a use case, material or mounting method to the query can separate decorative brackets from load-bearing ones.

FAQ

Sıkça sorulan sorular

What should I measure before printing a mounting bracket?
Measure hole spacing, screw diameter, plate thickness, and the distance between mounting surfaces. Also note the load direction and clearance around the part.
Do these models need supports?
It depends on overhangs and print orientation. Some flat plates can print without supports, while brackets with arms or ribs may need them. Check the author's notes and photos.
How can I adapt a bracket to different hole sizes?
Look for parametric or generator models, or edit the mesh in CAD. Uniform scaling changes all dimensions, so adjust holes separately when possible.
Which material should I use for a mounting bracket?
The choice depends on stiffness and load. Authors often list a material and settings, so compare those with the intended use.
İlgili
Alet ve ekipman

3D Printing Brackets: STL Mounts and Fixing Parts

2447 model
Ev ve yaşam

3D Models of Plates: STL Files for Many Uses

471056 model
Ev ve yaşam

3D Organizer Plakası Modelleri ve STL Dosyaları

8146 model
Ev ve yaşam

Köşe braketi 3D model ve STL dosyaları

231272 model
Alet ve ekipman

3D yazıcı baskı plakası tutucu modelleri

16317 model
Ev ve yaşam

Dişli ve Vidalı Kanca 3D Model ve STL Dosyaları

2832 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç