Yazıcı parçaları

3 mm Spacers and Inserts: 3D Models and STL Files

This collection gathers STL files where a 3 mm dimension defines the part: spacers, clips, inserts and small adapters. It helps when a piece has to sit around a rod, cable, magnet or panel without wobbling. Check the author's page for the exact size, material and print orientation before starting. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 12048 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12048 model
Kategori hakkında

«3 mm Spacers and Inserts: 3D Models and STL Files»

The files range from parts that set a distance, such as spacers and risers, to parts that grip or route something, such as clips and holders. Inserts and organizers usually have cavities or cutouts sized around a 3 mm object, while gauges and cutters use the dimension as a measuring or cutting reference. Small pins and fittings are closer to mechanical hardware and often need tighter clearance checks.

On the author's page, read the stated outer and inner dimensions, wall thickness and the number of separate pieces. For a 3 mm feature, layer height and nozzle diameter affect how cleanly a hole or slot comes out, so check the print orientation and whether supports are mentioned. If the part must slide over a rod or cable, note the clearance the author gives and compare it with your own measurement.

Try synonyms such as spacer, shim, insert, clip, holder, adapter, gauge or pin, and add the object the part touches, for example cable, filament, magnet or panel. Related searches can include wall thickness, inner diameter, outer diameter, slot width or clearance. If a result is close but not exact, look at remixes or parametric versions that let you adjust the 3 mm dimension.

FAQ

Sıkça sorulan sorular

What does 3 mm refer to in these models?
It can mean a hole diameter, pin diameter, slot width, wall thickness or clearance. The author's page should state which dimension is 3 mm and where it sits on the part.
How do I choose between a spacer, clip and insert?
A spacer sets a gap or distance, a clip grips or routes a cable or filament, and an insert lines or fills a hole. Match the shape to the contact point and check the listed dimensions.
What should I check before printing a 3 mm part?
Check the stated size, tolerance, material, layer height and orientation. Small holes and slots can print tighter or looser depending on the printer and slicer settings.
Can I scale a 3 mm model to another size?
Scaling changes every dimension, including clearances and wall thickness. If the model is parametric, adjust the 3 mm value directly; otherwise test the scaled part before using it in an assembly.
İlgili
Yazıcı parçaları

Thin Plate 3D Models: STL Files for Flat Parts

2126337 model
Yazıcı parçaları

3 mm Spacer STL Models for 3D Printing

12652 model
Yazıcı parçaları

6 mm Tube Holders: STL Models for 3D Printing

5423 model
Alet ve ekipman

3 mm Washer STL Models for 3D Printing

2191021 model
Ev ve yaşam

3D Models for 40 mm Pipe Fittings and Adapters

335114 model
Alet ve ekipman

3D Models of 20 mm Gears and Gear Mechanisms

14475 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç