Taşıtlar

VAZ 2106 Cup Holder STL Models for 3D Printing

This collection gathers STL files for cup holders for classic VAZ interiors, including vent, door, and console-mounted designs. You will also find adapters for cans and bottles, plus general-purpose holders that can be modified. It helps you find a starting point for 3D printing a part that matches your car's dashboard. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 483774 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 483774 model
Kategori hakkında

«VAZ 2106 Cup Holder STL Models for 3D Printing»

Cup holders for classic VAZ models often come as one-piece consoles or clip-on brackets. Vent-mounted versions save space but depend on the vent shape, while door and seat-mounted holders use different fixing points. Adapters for cans or bottles are smaller and may need a liner to reduce rattle.

Before printing, check the model page for the outer dimensions, the number of parts, and whether the author lists supports. Look at photos of real prints to judge how the holder sits against the dashboard and whether the opening matches your cup or bottle. Material and settings matter: a part that stays in a hot car may need a filament with higher heat resistance, and thin clips can benefit from more walls.

If you do not find a direct match for your car, try related terms such as cup holder, can holder, drink holder, or console insert. You can also search for the dashboard or tunnel shape rather than the car name, or look for universal holders with adjustable arms. Combining a generic holder with a custom bracket is another route when the original mounting points are unusual.

FAQ

Sıkça sorulan sorular

Will a cup holder for one VAZ model work in another?
Not always. Mounting points and dashboard curves differ between models, so check the dimensions and the intended position before printing.
What material is usually used for car cup holders?
Many authors list PETG, ABS, or ASA for parts that see heat. PLA can work in cool climates but may soften in a hot car.
Do these models need supports?
It depends on the shape. Brackets with overhangs often need supports, while flat or two-part designs may print without them. The author's page usually notes this.
How can I adapt a cup holder to a different cup size?
Look for models with separate rings or liners, or scale the opening slightly in your slicer. Test with a draft print before using the final material.
İlgili
Taşıtlar

VAZ 2106 Cup Holder 3D Printing Models and STL Files

390100 model
Taşıtlar

VAZ 2106 3D models: parts, trim and badges

63058 model
Taşıtlar

VAZ 2106 Cup Holder 3D Models and STL Files

12485 model
Taşıtlar

Cup Holder and Vase 3D Printing Models

13944 model
Taşıtlar

VAZ Cup Holder 3D Models: STL Files for Car Interiors

498051 model
Taşıtlar

VAZ 2106 Grille STL Models for 3D Printing

60517 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç