Ev ve yaşam

3D Models for Electric Toothbrush Holders and Stands

This collection gathers STL files for stands that hold electric toothbrushes, multi-brush family docks and organizers for brush heads. You can compare single-brush cradles with charging stations that route cables, then adapt scale or mounting style for your own bathroom setup. It helps you find a practical 3D printing project when counter space is limited. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 7 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 556380 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 556380 model
Kategori hakkında

«3D Models for Electric Toothbrush Holders and Stands»

Most designs fall into a few groups: a single-brush cradle, a stand that holds several brushes for a household, a dock that keeps a charging base upright, and a small tray or cup for spare brush heads. Some models combine a brush slot with a shelf for toothpaste or a razor, while others focus on cable routing or wall mounting. The main differences are footprint, number of slots and whether the charging base sits inside or beside the printed part.

When choosing, look at the dimensions and scale the author lists, the number of separate parts, and whether assembly uses screws, magnets or friction fits. Check whether the model needs supports, which material and layer height the author recommends, and any photos of real prints. For bathroom use, consider how the part will drain and how the cable exits if a charger is involved.

To refine a search, try synonyms such as toothbrush stand, brush holder, charging dock organizer, and brush-head storage. Related terms include bathroom organizer, wall mount, countertop stand, and family toothbrush rack. You can also search by the type of electric brush or grooming tool you own, then adjust the model in a slicer to match its base.

FAQ

Sıkça sorulan sorular

What should I measure before printing a holder for an electric toothbrush?
Measure the handle diameter, the width and depth of the charging base, and the space where the holder will sit. Also note how the brush sits when charging, because that affects slot angle and clearance.
Can I resize a holder to fit a different brush?
Scaling changes both the slot and the base, so check wall thickness and charger clearance after resizing. A small test print of the slot area can show whether the fit works before printing the full part.
Do these holders need supports?
It depends on overhangs and print orientation; many designs are split into parts to reduce them. The author page often shows the intended orientation and any support notes.
How can I keep a charging cable tidy?
Look for a channel, cutout or clip in the model, and plan the cable exit direction before printing. Avoid sharp bends near the connector.
İlgili
Ev ve yaşam

3D model elektrikli diş fırçası standı

4124 model
Nesneler

Fırçalar için 3D model ve STL dosyaları

45036 model
Ev ve yaşam

Brush Holder 3D Models: STL Files to Browse

580415 model
Ev ve yaşam

3D model fırça organizeri

192089 model
Ev ve yaşam

3D Fırça Tutucu Modelleri ve STL Dosyaları

13746 model
Ev ve yaşam

3D model diş fırçalığı: STL dosyaları ve seçim notları

577795 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç