Bahçe

3D Models for Beach Umbrella Stands and Anchors

This collection covers STL files for beach umbrella holders: sand anchors, pole clamps, trays and folding stands. Most of them are small parts that fit a single 3D printing session, and many are built around a common pole diameter. The range makes it easier to match a holder to your umbrella and to the ground you use it on. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2734 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2734 model
Kategori hakkında

«3D Models for Beach Umbrella Stands and Anchors»

The models fall into a few groups. Sand anchors and screw-in holders push into loose ground and are usually printed as one thick piece with a wide thread or fins. Clamps, clips and hooks grip an existing pole and add a small attachment point. Trays and tables sit higher on the pole and hold drinks or small items, while a few mounts connect the umbrella to a chair, a board or another piece of gear.

When choosing, look at the pole diameter the author lists and measure your own umbrella before printing. Check how many parts the model has, whether they screw, slide or bolt together, and whether the author reports that supports are needed. Material matters as well: parts that take sideways load in sand are often printed in a tougher filament with more perimeters, and the author's page usually states the layer height and infill used for the photos shown.

If the results look narrow, try other terms for the same idea: sand screw, ground anchor, pole clamp, umbrella mount, parasol holder, beach table. Related searches such as camping table, fishing rod holder or SUP mount often lead to parts with the same thread or clamp geometry. You can also search by the pole size you need, or by the surface you use, sand, grass or a hard deck.

FAQ

Sıkça sorulan sorular

What pole diameter should I look for?
Measure the shaft of your umbrella near the base and compare it with the diameter stated on the model page. Many designs come in several sizes, and a small difference can decide whether the part grips or slips.
Do these parts need supports?
It depends on the shape. Screw anchors with an overhanging thread and clamps with a closed ring often need them, while flat plates and open hooks usually do not. The author's page is the place to confirm this.
Which filament works for a sand anchor?
Sand and sun are hard on printed parts. A tougher filament with more walls and higher infill is a common choice, and the author's listed settings are a reasonable starting point.
Can I use the same holder on grass or a hard surface?
Screw and spike designs are made for loose ground and will not hold on a deck or tile. For hard surfaces you need a weighted base or a clamp that grips a table or railing instead.
İlgili
Bahçe

Bahçe şemsiyesi için 3D model ve STL dosyaları

2267 model
Nesneler

3D model şemsiye tutucu ve montaj aparatları

2716 model
Taşıtlar

Car Umbrella Holders: 3D Models and STL Files

650081 model
Ev ve yaşam

Umbrella Mounts for Chairs: 3D Models and STL Files

288195 model
Moda ve aksesuarlar

Beach Bag 3D Models and STL Files to Print

2040 model
Bahçe

3D otomatik su tamamlama modelleri

4607 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç