Yazıcı parçaları

3D printing stand for 235x235 mm build plates

This collection gathers STL files for stands, holders and risers that keep a 235x235 mm build plate or heating plate in place. You can compare designs for desktop storage, side mounting and screw protection. It helps you find a printable accessory for your 3D printer setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 7350 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 7350 model
Kategori hakkında

«3D printing stand for 235x235 mm build plates»

The models range from simple desktop stands that hold one plate upright to multi-slot racks that store several plates at once. Side-mounted holders and risers keep the plate close to the printer frame, while screw caps cover the heating plate screws. Some designs are made for a specific printer series, and others use a universal or adjustable layout.

Before printing, check the listed plate size and the holder opening, because a stand made for one plate thickness may not fit another. Look at the number of parts, whether assembly is required, and if the author lists supports or particular material settings. Photos of real prints on the model page can show how the holder sits and whether the plate stays clear of cables or the frame.

To narrow the results, try synonyms such as build plate holder, plate stand, plate rack, heating plate holder, and printer riser. Related searches include build plate storage, side mount, screw cap, and adjustable stand. Adding your printer model or plate size to the query can help separate dedicated designs from universal ones.

FAQ

Sıkça sorulan sorular

What is a build plate holder for?
It is a printed stand or bracket that keeps a 235x235 mm build plate or heating plate upright, stored, or mounted near the printer. Designs vary from simple desk stands to side-mounted risers.
How do I choose the right holder for my plate?
Check the plate size, thickness, and whether the holder is meant for a single plate or several. Also review the part count, assembly steps, and any material or support notes the author provides.
Can I print a plate holder in different materials?
The material depends on the design and where the holder will sit. If it stays near a heated area, look at the author's notes and choose a filament that matches the listed temperature and stiffness needs.
What should I check before printing a riser or side mount?
Confirm the mounting points, clearance around the printer frame, and the plate size the riser was drawn for. A test fit with the plate before final assembly can reveal interference.
İlgili
Yazıcı parçaları

3D yazıcı tabla standı ve tutucu modelleri

7631 model
Yazıcı parçaları

Flashforge için tabla tutucu ve stand STL modelleri

8243 model
Yazıcı parçaları

Creality K2 için 3D model: tabla tutucular

2367 model
Yazıcı parçaları

3 mm plaka 3D model ve STL dosyaları

2508986 model
Yazıcı parçaları

Delikli Plaka 3D Model ve STL Dosyaları

131162 model
Ev ve yaşam

3D Models of Plates: STL Files for Many Uses

471056 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç