Elektronik

3D Models for Mounting Strips and Clips

This collection gathers 3D models of mounting strips, clips and holders: parts that keep LED tape, cables, straps or trim edges in place. Most of them are small, so they print quickly on a desktop 3D printer and can be adapted to a particular profile or panel. The STL files come from several platforms, and each entry leads to the author's page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 12636 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 12636 model
Kategori hakkında

«3D Models for Mounting Strips and Clips»

The strip-shaped parts differ in how they grip. LED rails and corner pieces follow the width of a tape and are often drawn around a named aluminium profile, while cable holders and clamps are built around a wire diameter or a tie. Strap locks and tensioners work with a belt width, and binding or transition strips take their shape from the thickness of the panels they join.

On the author's page, look at the dimensions, the number of separate parts and whether the model is split for assembly. Note the material and settings the author lists, and whether supports are needed for overhangs. Photos of real prints show how the part sits against a surface and where the screw holes land.

If a search returns little, try other words for the same object: clip, holder, bracket, rail, clamp, fastener, edge trim. Related topics help as well — cable management, LED profiles, belt and strap hardware, furniture trim. Adding a size or a profile name to the query narrows the list.

FAQ

Sıkça sorulan sorular

What counts as a mounting strip in 3D printing?
A flat or angled part that holds something against a surface: LED tape, a cable, a strap or a panel edge. It is usually printed as one piece with holes or slots for screws or ties.
Which material suits these parts?
It depends on the load and the place of use. PLA is stiff and easy to print, while PETG and ABS tolerate more flex and warmth. The author's page often names a material and settings.
Do these models need supports?
Some do, especially clips with overhangs or long rails. The model page shows the intended orientation and states whether supports are required; another orientation can sometimes avoid them.
How do I match a strip to a profile or panel?
Measure the width of the tape, cable or panel and compare it with the dimensions given on the model page. Scaling changes hole sizes, so verify them before printing.
İlgili
Alet ve ekipman

3D Models of Fastenings and Mounts for 3D Printing

728982 model
Alet ve ekipman

5.8 GHz Antenna and Device Mounts: STL Files to Print

8265 model
Elektronik

Speaker Mounts: 3D Models and STL Files to Print

216407 model
Elektronik

Cable Mounting Clips and Brackets: 3D Models

251704 model
Elektronik

Wire Mounts and Cable Clips: STL Models for 3D Printing

227046 model
Elektronik

3D Models for Echo and Marine Device Mounts

6674 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç